BISSELL Air320 - Smart Air Purifier Manual

Read & Save These Instructions

This model is for household use only.

Plastic film can be dangerous. To avoid danger of suff ocation, keep away from children.

Do not plug in your air purifier UNTIL you are familiar with all instructions and operating procedures.

To reduce the risk of electrical shock, turn power OFF and disconnect polarized plug from electrical outlet BEFORE performing maintenance or troubleshooting checks.

Control Dial & Digital Display

1. Control Dial
   • Press the power button in the center of the dial to turn the air320 ON and OFF.
   • To adjust fan speed, twist the dial clockwise.
   • To reset the filter(s), press and hold the power button for 3 seconds.
2. Digital Display
   Air Quality
   The three digit number on the front of the display is a real-time reading of your indoor air quality. See more details.
   NOTE: 002 is the resting, lowest number.
   
   Fan Speed
   The air320 has 5 dierent fan speeds ranging from low to high. It also has an auto mode ( A ) which can be selected using the Control Dial. See for more details on Auto Mode.
   
   Night Mode
   The air320 has an automated Night Mode. As less light enters a room, the lights on the Digital Display of the air320 will turn o to help create a peaceful sleeping environment.

System

When set to Auto Mode, the BISSELL® air320 uses its CirQulate® System to provide optimum filtration based on your home's indoor air quality.

CirQulate uses the air320's PM 2.5 sensor to measure microscopic particles like dust, pollen and even smoke.

Then, CirQulate's Digital Air Quality Feedback Display provides both a numerical and colored indication of your homes indoor air quality in real-time, making your once invisible concerns, visible.

Good Air Quality

Moderate Air Quality

Poor Air Quality

Filter Reset Indicator & Filter Reset

If your digital display is showing and/or , this means that either one or both of your filters needs to be replaced.

Replace HEPA Filter

Replace Carbon Filter

Replace Both Filters

After replacing your filter(s), press and hold down the power button for 3 seconds to reset the filter(s). Once reset, the air320 will beep and the and/or will no longer show on the digital display.

Maintenance & Care

Filter Replacement

Each filter has easy pull tabs. The tabs should face outward. Insert the activated carbon filter before inserting the HEPA filter.

NOTE: Filter life varies based on run time and existing air conditions. It is recommended to replace both the HEPA and activated carbon filter once every six months. It is also recommended to occasionally vacuum the fabric front panel to remove dust.

Particulate Sensor Cleaning

For accurate air quality display readings, the sensor screen located inside the sensor door should be removed and gently cleaned with a cotton swab once every six months.

Service

Parts & Supplies

For Parts and Supplies, go to BISSELL.com/parts and enter your model number in the search field.

Registration

Registering is quick, easy and offers you benefits over the lifetime of your product.

You'll Receive:

BISSELL^® Rewards Points
Automatically earn points for discounts and free shipping on future purchases.

Faster Service
Supplying your information now saves you time should you need to contact us with questions regarding your product.

Product Support Reminders and Alerts
We'll contact you with any important product maintenance reminders and alerts.

Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips, and more!

Visit BISSELL.com/product-registration

Need Some Help?

For more support and information, please visit support.BISSELL.com.

Safety Instructions

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Use indoors only. Do not use for any purpose other than described in this user guide.

Use only manufacturer's recommended accessories.

Do not use with damaged cord or plug.

If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

Do not move or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp corners. Keep cord away from heated surfaces.

Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Arrange cord away from traffic areas so it will not be tripped over.

Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.

Do not handle plug or appliance with wet hands.

Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair and anything that may reduce air flow.

Keep hair, loose clothing and fingers away from openings.

Turn OFF device controls before unplugging the appliance.

Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic vapors.

Keep appliance on a level surface.

Do not immerse the unit in water or other liquids, do not pour liquids into or around the unit or openings.

Do not use the appliance near water or in a damp or wet location.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Do not use the appliance with any dimmer switch or solid state speed control device.

Documents / Resources

References

• Support Home Page
• Support Home Page

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BISSELL Air320 - Smart Air Purifier Manual