Loop Points; End Point - Akai U40 Operator's Manual

Loop Points
Loop Points
portion you want to hear.
Start Point
End Point
During playback of the recording, press
anew end point for the looped playback.
SET LOOP END specifies
Canceling a Loop
During playback of the recording, pressing both SET LOOP START
and SET LOOP END cancels a loop you specified: Playback will be
looped over the whole length of the recording.
I
the Note Grabber function (pg. 10) is activated. Doing so will change the loop
points, but the change will not be available until the next time you enter normal
play mode. The results will be unpredictable.
RIFF-O-MATIC U0