Page 1
ASSEMBLY INSTRUCTIONS - LEGS AND FRAMES KOLONN KOLONN KOLONN R COMPONENTS Put the tabletop upside down on a protective cover. Mount the frames in the designated holes. Use a cross-head screwdriver to screw 6 x M6 bolts/frame. (PH3) 1 x Tabletop...
Page 2
ASSEMBLY INSTRUCTIONS - DOCKY AND CABLES KOLONN KOLONN KOLONN R Mount the docky to the designated holes. Plug in the connector from the leg/legs to the docky. COMPONENTS Use a cross head screwdriver to screw 4 x (3x15mm) screws. 1/2 x...
Page 3
ASSEMBLY INSTRUCTIONS - DOCKY AND CABLES KOLONN KOLONN KOLONN R 1. Connect 1 x GST-CABLE to each DOCKY. Attach the rubberbands to fix the cables COMPONENTS 2. Conncet the other ends of the GST-CABLEs to the T-CONNECTOR. to the frames using the designated holes.
Page 4
MONTERINGSANVISNINGAR - BEN OCH SARGER KOLONN KOLONN KOLONN R KOMPONENTER Lägg bordsskivan upp och ner på ett Montera sargen i de anvisade hålen. skyddande underlag. Använd en stjärnskruvmejsel för att skruva i 6 x M6 skruvar/sarg. (PH3) 1 x Bordsskiva 4 x Ben Placera det förmonterade benet på...
Page 5
MONTERINGSANVISNINGAR - DOCKY OCH KABELDRAGNING KOLONN KOLONN KOLONN R Montera dockyn i de anvisade hålen. Koppla in kontakt från ben till docky. KOMPONENTER Använd en stjärnskruvmejsel för att skruva i 4 x (3x15mm) skruvar. 1/2 x 4/8 x Docky 3x15 Skruv...
Page 6
MONTERINGSANVISNINGAR - DOCKY OCH KABELDRAGNING KOLONN KOLONN KOLONN R Fäst gummibanden för att fixera kablarna. 1. Koppla 1 x GST-KABEL till varje DOCKY. KOMPONENTER Använd de anvisade hålen. 2. Koppla den andra änden av GST-KABELN till T-KONTAKTEN. 3. Koppla 1 x GST-SCHUKO till T-KONTAKTEN.