Do you have a question about the Tecnare ARRAY Series and is the answer not in the manual?
Questions and answers
Summary of Contents for EXEL ACOUSTICS Tecnare ARRAY Series
Page 1
Operation Manual ARRAY Series CLa21 Curvilinear Array Loudspeaker Keep these important operating instructions. Check www.tecnare.com for updates.
Page 3
Exel Acoustics SL accepts no responsibility for any errors or inaccuracies that may appear in this manual or the products and software described in it. Technical specifications, dimensions, weights and properties do not represent guaranteed qualities.
Operation Manual IMPORTANT SAFE INSTRUCTIONS Before using our product, be sure to carefully read the manual and safe Instructions. Keep this document with the device all time. Read these instructions. several enclosure on top of one another, use straps to secure them against movement. Keep these instructions.
Page 5
Operation Manual SYMBOLS USED OBLIGATION.This Important operating Additional instructions must instructions information be strictly followed Obligation. Cela Pour indequer important Information doit être Instructions complémentaire strictement instructions Suivi Wichtige Pflicht. Diese Betriebsanweisung Informationen. Anweisungen oder Zusätzliche müssen strikt Gebrauchsanleitung Informationen befolgt sanleitung Obligación.
Operation Manual DECLARACIÓN DE CONFORMIDAD DECLARATION OF CONFORMITY EXEL ACOUSTICS SL CL Encinar, 282. Polígono Industrial Monte Boyal. 45950 – Casarrubios del Monte (Toledo), España (Spain). Declara que el producto CLa21 y sus respectivas opciones, cumple con las Directivas: Declare under our sole responsibility that devices in the CLa21 range of products, comply with relating Directives: (1) Directiva de Baja Tensión - 2006/95/CE...
If you would like further information about this or any other Tecnare product, please contact us. We look forward to helping you in the near future. As part of a continuous evolution of techniques and standards, Exel Acoustics ® SL as manufacturer of Tecnare products reserve the right to change the specifications of its products and the content of its documents without prior notice.
Operation Manual Overview the CLa21 The Tecnare CLa21 line source is a compact high-power curvilinear array loudspeaker, member of the ARRAY family of loudspeakers. Its extended high-frequency headroom delivers clarity, precision, and a unique proximity effect over its wide operating frequency range of 60 Hz to 18 kHz.
Operation Manual Connections ® ® CLa21 loudspeaker utilizes Neutrik SpeakON connectors. There are two NLT4 ® connectors on the rear of each CLa241. These connectors mate with Neutrik NL-4 or NL-4 compatible in-line cable connectors. All four pins of both connectors are wired in parallel to link multiple loudspeakers on a single amplifier output.
Operation Manual Processing and Amplification Only operate Tecnare loudspeaker with a correctly configured Tecnare preset. Tecnare offer a complete solution that guarantees the highest level of performance. A complete range of controllers, amplified and amplified controller with DSP are available to get this objective. Otherwise, there is a risk of damaging the loudspeaker components.
Operation Manual Dispersion Characteristics The graph below show dispersion angle over frequency of a single CLa21 enclosure. Isobar diagram CLa21 horizontal Isobar diagram CLa21 vertical...
Operation Manual Loudspeaker Connection ® Tecnare Sound Systems recommended operating the CLa21 loudspeaker together Tecnare loudspeaker controllers. ® Tecnare only recommends using preset/amplifier developed by Tecnare, otherwise there is a risk of damaging the loudspeaker components. DP Series Loudspeaker Controller, PA Series amplifier and T-Series amplifier are ideal for this purpose.
Operation Manual Connecting CLa21 to PA2100 & PA4.450 MAXIMUM OF 2 ENCLOSURES PER PA2100 (LF) / 4 ENCLOSURES PER PA4.450 (HF) 2 x CLa21 can be connected in parallel to each pair of output channels on the PA2100 and PA4.450 amplifiers. Impedance load: 1 Enclosure →...
Operation Manual Connecting CLa21 to T-Series MAXIMUM OF 8 ENCLOSURES PER T-SERIES 4 x CLa21 can be connected in parallel to each pair of output channels on the T-Series amplifiers. Impedance load: 1 Enclosure → LF: 8Ω; HF:16Ω 2 Enclosures → LF: 4Ω; HF:8Ω 4 Enclosures → LF: 2Ω; HF:4Ω...
(1) Standard Mode(CLa21 Preset)/Cut mode (CLa21_80 preset) Application information is presented for guidance only. Exel Acoustics SL reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program Exel Acoustics...
Page 19
The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be construed as a commitment by Exel Acoustics SL. Exel Acoustics assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording or otherwise, without prior written permission from Exel Acoustics.
Need help?
Do you have a question about the Tecnare ARRAY Series and is the answer not in the manual?
Questions and answers