Note For Parts List - Denon TU-235RD Service Manual

Sa TO a es --35RO/TU-26OLi &
NOTE FOR PARTS LIST
@ Part indicated with the mark "©* are not always in stock and possibly to take a long period of time for supplying, or in
some case supplying of part may be refused.
@ When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-supplying.
@ Ordering part without stating its part number can not be supplied.
@ Part indicated with the mark "x" is not illustrated in the exploded view.
@ Not including Carbon Film +5%, 1/4W Type in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
WARNING: ;
Parts marked with this symbol A\ Mil have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
@ Resistors @ Capacitors
Ex: RN 14K 2 «4182 «6G ER Ex: CE O04w 4H 2R2 M BP
Type Shape Power Resist- Allowable Others Type Shape Dielectric Capacity Allowable Others
and per- ance error and per- strength error
formance formance
Units: ohm
: Carbon : : : Putse-resistant type : Aluminum foil F : High stability type
: Composition 7 : : Low noise type electrolytic
: Metal oxide film : : : Non-buming type : Aluminum solid G: : Non-polar type
: Winding : : : Fuse-resistor electrolytic
: Metal fitm : : : Lead wire forming : Tantalum electrolytic Jo: : Ripple-resistant type
Metal mixture Film K: : For change and discharge
: Ceramic M: : For assuring high
frequency
: Ceramic > : UL part
: Oi : CSA part
3 =
1800 ohm = 1.8 kohm
: Mica
P: : UL-CSA type
Indicates number of zeros after effective number. : Metallized : Lead wire forming
2-digit effective number. : Metallized .
=
1R&R => 1.2 ohm
t eee 1-digit effective number.
2-digit effective number, decimal point indicated by R.
* Capacity (electrolyte only)
2-digit effective number.
¢ Units: pF.
28h 2 = 2.2uF
t 4 1 -digit effactive number.
2-digit effective number, decimal point indicated by R.
¢ Units: pF.
* Capacity (except electrolyte)
> 2200pF=0.0022uF
(More than 2)— Indicates number of zeros after effective number.
2-digit effective number.
¢ Units: pF.
=> 220pF
(0 of 1) Indicates number of zeros after effective number.
2-digit effective number.
* Units: pF.
« When the dielectric strength is indicated in AC, "AC" is included after the dieelectric
strength vaiue.
15