Proxy
Port:
This number is also specified by the provider with the proxy address.
1) Select
Proxy Port
2) Enter the number with
3) Press
BACK/RETURN
4. Select
Network Status
Network > Network settings > Network Status
5. Select
Exit
with
= Note =
When the network connection type is set to Wired,
●
Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
●
setup. For details, read the manual of the equipment.
1. Display the menu with MENU.
2. Select
Network
>
with
/
/
/
3. Select
Connect to device in WPS
To set manually, select
●
4. Select and set
WPS(Push button)
access.
WPS(Push
button):
Set up the equipment for
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
with
/
.
Numeric
to store.
with
/
and press
/
and press
OK
to set.
Network Connection
and press
OK
to access.
with
Change settings
/
WPS(PIN)
WPS(Push
- 128 -
buttons.
OK
to access.
Wireless
>
Custom
>
Wireless Access Point
/
and press
OK
(see below).
with
/
button). For details, read the
is deactivated.
to access.
and press
OK
to