Table of Contents
Advertisement
2.
Select the required performance level or set the
and symbols to .
9.3 Automatic start for the ventilation
system
If you select a power level for a cooking zone, the auto-
matic start switches on.
The ventilation system starts at the corresponding
power level. You can find out how to change this set-
ting in section
→ "Basic settings", Page 13.
9.4 Run-on function for the ventilation
system
The run-on function leaves the ventilation system run-
ning for a few minutes after the hob has been switched
off. This allows you to remove any cooking fumes that
remain. The ventilation system then automatically
switches off.
Activating the fan run-on
As standard, the run-on time is activated with a max-
imum switch-off time.
10 combiZone
It allows two cooking zones of the same size to be
combined, with the same power level being switched
on in both. This is intended in particular for cooking
with long cookware.
This function allows you to cook with one item of cook-
ware that occupies one cooking zone and that can be
moved from one zone to another for increased conveni-
ence. In this case, the two zones also retain the same
power level and the same settings.
10.1 Positioning the cookware
Use cookware that fits into the cooking zones.
11 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
You can find out how to change this setting in section
→ "Basic settings", Page 13.
Note: The run-on function only switches on if at least
one cooking zone has been switched on for at least
one minute.
Deactivating the fan run-on
Manually
To deactivate the function, touch .
Automatically
The appliance deactivates the run-on function if:
¡ The run-on time has elapsed.
¡ You switch the appliance on again.
10.2 Activating combiZone
1.
Select one of the cooking zones and set the power
level.
2.
Touch .
lights up and the power level is shown in the dis-
a
plays for both cooking zones.
10.3 Deactivating combiZone
▶
Touch .
a The two cooking zones now operate independently
of one another.
11.1 Switch-off timer
Allows you to programme a cooking time for a hotplate
and its automatic switch-off once the set time has
elapsed.
Programming the cooking time
1.
Select the cooking zone and the required power
level.
combiZone en
11
Advertisement
Table of Contents
