Table of Contents
Advertisement
Exhaust Port Cleaning
Level 2.
Parts Required: As needed: Heat Shield
1.
Remove spark plug lead from spark plug, and remove engine
cover.
2.
Place piston at top dead center. Remove muffler (A) and heat
shield (B).
3.
Use a wood or plastic scraping tool to clean deposits from cylin-
der exhaust port.
IMPORTANT
Never use a metal tool to scrape carbon from the exhaust port.
Do not scratch the cylinder or piston when cleaning the exhaust
port. Do not allow carbon particles to enter the cylinder.
4.
Inspect heat shield, and replace if damaged.
5.
Install heat shield and muffler.
6.
Tighten muffler mounting bolts (or nuts) to 60-70 in•lbf (70-80
kgf•cm).
7.
Loosely reassemble engine cover.
8.
Tighten all screws securely.
9.
Attach spark plug lead.
10. Start engine, and warm to operating temperature.
11. Stop engine, and re-tighten mounting bolts (or nuts) to specifica-
tions.
P
B
ower
lower
o
'
M
Perator
s
19
anual
B
a
Advertisement
Table of Contents
