Channel Set Up - Sylvania 6620LDF Owner's Manual

A UTO CHANNEL PROGRAMMING
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1
Press [SETUP] then press [A] or [v] to point
to "CHANNEL SET UP".
/ \
\ /
CHANNEL SET UP
V.CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK L_GHT [SR_GN_
2 Press [ENTER] then press [,] or [v] to point
to "AUTO PRESET CH".
CHANNEL SET UP
_- ADD / DELETE CH (CATV /
3
Press [ENTER].
° The tuner sctms trod memorizes all the active
channels in your area.
° The tuner stops on the lowest memorized channel.
NOTE
° When "AUTO PRESET CH" is actiwlted
where there is no TV signal input, "NO TV
SIGNAL" will appear on the display after the
completion of channel scamling.
• The unit may recognize CATV ch_mnels to be
TV channels if reception condition is poor. ha
this case, check the tmtenna connection and try
"AUTO PRESET CH" again when reception
conditions are better.
° Channel memory programming is NOT nec-
essary when connected to a cahle box or satel-
lite box. Just select the channel for cahle box
or satellite input (ex. CH3) on the unit, then
select your desired channel on the cable box
or satellite box.
ADDING/DELETING CHANNELS
The chtmnels you no longer receive or seldom watch
c_mbe deleted from the memory. (Of course, you c_m
add the deleted channel into the memory again.)
1
Press [SETUP] then press [,] or [v] to point
to "CHANNEL SET UP".
- TV SET Up-
2
3
4
5
CHANNEL SET UP
_ .maUAGE [_.eUS,1
CAPTION [OFF]
.; BACK UGHT [BRIGHT]
Press [ENTER] then press [_] or [v] to point
to "ADD/DELETE CH".
ADD / DELetE OH (GARY)
Z
Z
Z
o
Press [ENTER] then press the Number but-
tons or [OH. • /T] to select the desired
channel number.
ADD/I)ELET E ......................
Press [ENTER] then the channel number
turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.
• To delete another ch_mnel, repeat steps 3 to 4.
• If you press [ENTER] again, the cham_el is
memorized again.
Added channel : Light blue
Deleted channel: Light red
Press [SETUP] to exit the menu.
-f NOTE 1
To confirm that channel(s) has been deleted
or added, press [CH. • / V].
13 EN