Advertisement
Available languages
Available languages
Use this Product Safety
When Parked
• Parking in direct sunlight can produce very high
temperatures inside your car Give the interior a
chance to cool down before switching the unit on
• Do not watch the monitor with the engine off It
will consume battery power and may prevent the
engine from starting
Use the Proper Power Supply
• This product is designed to operate with a 12 V,
negative ground battery system (the normal sys¬
tem in a North American car)
Use Authorized Servicenters
• Do not attempt to disassemble or adjust this pre¬
cision product Please refer to the Servicenter list
included with this product for service assistance
For Installation
• Where and how this unit is installed differs
according to the car model concerned
As
such, the information contained in this installa¬
tion
guide
is
designed
for
professional
installers and is not intended for non-technical
individuals
• Be sure to install the monitor in a position that
does not obstruct the driver's vision
• If the monitor has been installed for the rear
seat passengers, they must be careful to pre¬
vent injury by hitting their heads on the monitor
in case of an accident
• Do not install the unit in an area where it would
obstruct the operation of an air bag
• Ask a trained technician to install the unit
Installation and wiring require training and
experience
To be safe, ask the sales outlet where you pur¬
chased the unit to perform the installation
v_'_)
Find the model number and serial number on
either the back or bottom of the unit
Please
record them in the spaces below and retain this
booklet as a permanent record of your purchase
to help with identification in case of theft
MODEL NUMBER
CY-VM5800U
SERIAL NUMBER_
DATE PURCHASED_
FROM
When Operating
o Be sure not to let the unit fall or be strongly
impacted since this may cause a malfunction or
fire
□ Cautions for the Liquid Crystal Panel
® Do not leave the liquid crystal panel surface facing
upwards
Storage temperature range -4 °F to 176 °F
(-20 °C to 80 °C)
When the liquid crystal panel reaches high tem¬
peratures or low temperatures, chemical changes
occur within the liquid crystal panel which may
cause malfunctions
• Do not strongly impact the liquid crystal panel
© When the temperature is very cold or very hot, the
image may not appear clearly or may move slow¬
ly Also, movement of the image may seem to be
out of synchronization or the image quality may
decline in such environments Note that this is not
a malfunction or problem
Usage temperature range 32 °F to 104 °F
(0°C to 40 °C)
• There may be red spots, blue spots and green
spots on the panel surface This is a characteristic
of liquid crystal panels and is not a problem The
liquid crystal panel is built with very high precision
technology and has at least 99 99% effective
image pixels Be aware that on 0 01 % of the panel
there may be missing pixels or constantly light
pixels
Spots
5
Advertisement
