Advertisement
Safety Symbols
The following
safety symbols are used throughout
this manual.
Familiarize
yourself
with each
of the symbols
and its meaning
before operating
this instrument.
Caution
The caution
sign denotes a hazard.
It calls attention
to a procedure
which,
if not correctly
performed
or adhered
to, could result in damage to or
destruction
of the instrument.
Do not proceed
beyond
a caution
sign until the
indicated
conditions
are fully understood
and met.
Warning
The warning
sign denotes
a hazard.
It calls attention
to a procedure
which,
if not correctly
performed
or adhered
to, could result in injury or loss of life.
Do not proceed
beyond
a warning
sign until the indicated
conditions
are fully
understood
and met.
General Safety Considerations
Warning
Before this instrument
is switched on, make sure it has been properly
grounded
through
the protective
conductor
of the ac power cable to a socket outlet
provided
with protective
earth contact.
Any interruption
of the protective
(grounding)
conductor,
inside or outside
the instrument,
or disconnection
of the protective
earth terminal
can result in
personal
injury.
Warning
There are many points in the instrument
which can, if contacted,
cause personal
injury. Be extremely
careful.
Any adjustments
or service procedures
that require
operation
of the instrument
with protective
covers removed
should be performed
only by trained
service
personnel.
Caution
Before this instrument
is switched on, make sure its primary
power circuitry
has been adapted
to the voltage
of the ac power source.
Failure
to set the ac power input
to the correct voltage
could cause damage to
the instrument
when the ac power cable is plugged
in.
iv
Advertisement
