Advertisement
Vignetting will not occur while shooting in the
following zoom ranges when using the lens hood.
Please detach the lens hood when shooting
outside of these
ranges.
• Full
Format:
Only at the telephoto end
• APS-H:
From the telephoto end to the
"H"
marking
• APS-C:
From the telephoto end to the "C"
marking (range when using the
zoom limiter)
U •
Part of the picture may be blocked if the hood is
not attached
properly.
• When attaching or detaching the
hood,
grasp
the base of the hood to turn it. To prevent
deformation,
do not grasp the rim of the hood to
turn it.
ENG-
11
Recessed Section
While the lens hood (included) is attached to the
lens,
Lens Cap 8-15 can be attached to the lens
hood by pressing the buttons located on the
upper and lower sides of the lens cap and
aligning its recessed parts with the convex parts
found in the lens hood
.
There is a gelatin filter holder at the rear of the
lens.
Cut the gelatin filter to fit within the white
frames.
Then insert the gelatin filter into the filter
holder.
ENG-12
•
Advertisement
