Table of Contents
Advertisement
1. ENTERING TO SERVICE MODE
1) Press MUTE button once
on Remote Control.
MUTE
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on TV.
Service mode
S
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
A single horizontal line ON/OFF:
Test signal selection :
Selection of the adjustment items :
Change of the data value :
Adjustment menu mode ON/OFF :
Initialization of the memory (QA02) :
Initialization of the self diagnostic data:
"RCUT" selection :
"GCUT" selection :
"BCUT" selection :
"CNTX" selection :
"COLC" selection :
"TNTC" selection :
Test audio signal ON/OFF (1kHz) :
Self diagnostic display ON/OFF :
SERVICE MODE
2) Press MUTE button again
to keep pressing.
Adjustment mode
Press
Press
TV (ANT)/VIDEO button (on TV)
TV (ANT)/VIDEO button (on Remote)
Channel s/t (on TV or Remote)
Volume s/t (on TV or Remote)
MENU button (on TV)
RECALL+Channel (s) button on TV
RECALL+Channel (t) button on TV
1 button
2 button
3 button
4 button
5 button
6 button
8 button
9 button
– 8 –
3) While pressing the MUTE button,
press MENU button on TV set.
S
(Service mode display)
Item
Data
Advertisement
Table of Contents
