LG 27HQ710S-W Owner's Manual page 20

[Picture]
1
Press to activate the LED Control Button. When the LED Control Button is activated, press
2
Among the LED Control Button, press
3
Configure the options following the instructions that appear in the bottom right corner.
4
To configure an upper menu or another item, press the LED Control Button
5
In order to exit from the OSD Menu, press the LED Control Button
The applicable setting options are as shown below.
NOTE
• The [Picture Mode] that can be set depends on the Input signal.
[Picture Mode] on SDR (Non HDR) signal
[All Settings] > [Picture]
[Custom]
[Picture Mode]
[Vivid]
[HDR Effect]
[Mono]
[REC709]
[REC2020]
[DICOM]
[Calibration 1]
[Calibration 2]
• [Calibration 1]/[Calibration 2]: Please install
20
to move to the left or right or
or press
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Heightens contrast, brightness and sharpness to display vivid images.
Optimizes the screen for high dynamic range.
Mono (black and white) color mode.
Optimizes the screen for REC709.
Optimizes the screen for REC2020.
A mode that optimizes the screen settings so you can view images for medical use.
Adjusts to the calibrated screen.
NOTE
and select [All Settings] to show the complete OSD Menu.
to move to the bottom or top to go to the [Picture].
or press to move to the settings.
.
Explanation
to run calibration.