Replacing - LG WW146RP Series Owner's Manual

7
Insert and lock the storage tank cover.
8
Close the top cover, plug in the power cord and
open the water supply valve.
9
When tank is full, discharge water for the first
time. Approximately time taken to fill the tank
to fullest is 1 hour, depending on water
pressure, temp etc.
WARNING
• Unplug the power cord when cleaning the
storage tank. lt may cause electric shock.
CAUTION
• Clean the tank by only using purified water. Do
not use chemical except chlorine or detergent
for cleaning the storage tank. Chemical or
detergent will not be washed away completely, it
can be harmful to the human body.
Cleaning the Water Outlet
Clean the water outlet periodically using a soft
clean brush. Fur or foreign substances may
accumulate in the water outlet.

Replacing

Replacing the Water Filter
Process of Purification
Drinking water
• Step 1
a
Out sediment filter with anti scalant module
- Remove big particles, rust stains, mud etc. and
reduce input water hardness to enhance filter
life.
• Step 2
b
Sedi + carbon filter
- Remove unseen dregs and other
contamination. Remove invisible fine
particles, residual chlorine, VOC (Volatile
Organic Compounds) etc.
• Step 3
c
*1
RO membrane filter
*1
recovery plus filter
- Remove dissolved impurities, heavy metals,
bacteria, viruses, VOC etc. from water.
- TDS reduction up to 90% ppm of source water.
• Step 4
d
Mineral booster filter
- Remove odour, add minerals in the purified
water without mixing impure water.
*1
Post carbon filter
- Remove odor and improves taste of water.
*1 Features and specifications may vary from
model to model.
MAINTENANCE
*1
, RO recovery filter , RO
*1
17