SDX Audio THERMOBOX Quick Start Manual

THANK
YOU!

GET STARTED

KEEPING HOT

Insert the electric plug in a socket.
The heating element will immediately start heat-
ing the box to 80 °C (factory value). You can see
the current temperature directly on the display.
When the temperature reaches 80 °C, the heat-
ing element switch off and will start again when
the temperature has dropped to 79 °C.
Wait at least 15 minutes (F) or 60 minutes (E)
so that the box has time to get evenly hot.

LOADING FOOD IN THE THERMOBOX

Food must be well heated
before it is placed in the box.
Load the canteens starting from the top.
(Feel free to use canteen lids to avoid spillage.)

UNLOADING FOOD FROM THE THERMOBOX

Unload the canteens
starting from the bottom.
FILAREVÄGEN 1 - SE294 39 SÖLVESBORG - SWEDEN - TEL: +46 (0) 456-135 10 - INFO@SDX.SE
We want to start by thanking you for your
confidence in choosing our food transport
box for your needs. We are convinced that
you will be satisfied!
Anders Pettersson, CEO

KEEPING COLD

Insert the electric plug in a socket.
The cooling unit will immediately start cooling
the box to 3°C (factory value). You can follow
the current temperature directly on the display.
When the temperature reaches 3°C, the cooling
unit stops and then starts again when the tem-
perature has risen to 5°C.
Wait at least 25 minutes (K) or 45 minuters (C)
so that the box has time to get evenly cold.
LOADING FOOD IN THE THERMOBOX
Food must be well cooled
before it is placed in the box.
Load the canteens starting from the bottom.
(Feel free to use canteen lids to avoid spillage.)
UNLOADING FOOD FROM THE THERMOBOX
Unload the canteens
starting from the top.
QUICK START GUIDE
REV 01 - 2023/03
WWW.SDX.SE