Panasonic CQ-DPX95EUC Operating Instructions Manual page 8

Power and Sound Controls
continued
Attenuator
• Press ATT to decrease volume to about 1/10 of the previous level.
• Press ATT again to cancel.
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
Normal Mode ^ VOLUME ^ BASS ^ TREBLE ^ BALANCE
SUB-W fader-1
Bass and Treble
• Press SEL to select the BASS (TREBLE) mode. Press "VOLA" or "V
VOL" to increase or decrease the bass (treble) response.
-12 to +12
-12 to+12
' Press A. or V for more than a half second to change numeric lev
els on the display rapidly.
Balance
• Press SEL to select the BALANCE mode. Press "VOLA" or "VVOL
to shift the sound volume to the right or left speakers.
:3HtnrjrE
1 to 15
Balance Center
>■? £?
1 to 15
Press A or V for more than a half second to change numeric lev¬
els on the display rapidly.
Fader
Press SEL to select the FADER mode. Press "VOLA" or "VVOL" to
shift the sound volume to the front or rear speakers.
1
hHjjEr^
ErjT
1 1
^
fn
1 to 15 Fader Center
1 to 15
• Press A or V for more than a half second to change numeric lev
els on the display rapidly.
Note:
When a Audio control mode (BAS/TRE/BAUFAD) is selected but no operation is made within 5
seconds (2 seconds at VOL mode), the display will return to the normal operation mode. In such a case,
press SEL again to select the control mode.
CQ-DPX95EUC