Zanussi MW 2732 Instructions For The Use And Care page 20

To Check
Time or Temperature
1. Push TIME OR TEMP Pad. Time or set
temperature will be displayed.
2. Push TIME OR TEMP Pad again; next
memory will be displayed.
3. Push START Pad to return to time
counting or actual temperature.
Power Setting
1. Push POWER Pad. Power setting will
appear in Display.
2. Push POWER Pad again; next power
memory will be displayed.
3. Push START Pad to return to time
counting or actual temperature.
To Change
Time or Temperature
1. Push TIME OR TEMP Pad until
memory to be changed is in the Display.
2. Push CHANGE/CANCEL Pad once.
3. Enter in new time or temperature by
touching Number Pads.
4. Push START.
Power
1. Push POWER Pad until memory to be
changed is in display.
2. Push CHANGE/CANCEL Pad once.
"HI" will appear in Display.
3. Enter new Power setting.
4. Push START Pad and oven will resume
operation at new Power setting.
Example for Using and
Programming the Memory
Chocolate cake
1 Pkt. chocolate cake mix
170 ml water
legg
1. Combine cake mix with water and egg in
medium mixing bowl. Beat well with
wooden spoon. Spread in 9-inch round
glass baking dish.
2. Microwave on SIMMER (50%) for 7
minutes.
3. Microwave on HIGH (100%) for 2-3
minutes or until toothpick inserted near
centre comes out clean.
About 6 servings.
To Programme
Memory 1
1. Push TIME Pad.
2. Enter 7:00.
3. Push POWER Pad
4. Enter SIMMER (50% power).
Memory 2
5. Push TIME Pad.
6. Enter 2.00.
7. Push START Pad.
1st Memory
The first memory will begin the cooking on
SIMMER (50%) because the cake needs to
start cooking slowly. A memory tone will
sound to remind you when the oven
changes to the next memory. The indicator
provides a visual display.
2nd Memory
The second memory automatically
increases the power setting to HIGH
(100%) for 2 minutes to quickly finish
cooking the cake. A tone sounds three time
when the time is up.
20