Installation (Professional installation recommended)
1. Unpack and check the
contents. Disassemble the
mere I support bracket front
the unit as shown in tin a
illustration, by untcr swing
the six screws on the unit
body.
2
.
Tighten the metal support bracket
to the cell
ling support
beam (a) a
using the supplied screws. Take
extra care to not panetr ate the
roof of your car.
3, Connect the wiring harness,
according to the diagram under
'Connection Diagram'on page17.
to the wires located In the dome
Eight of your vehicle.
4. Flip the monitor screen down and
lighten the monitor to the support
bracket, using the supplied screws.
Connection Diagram
Jrilllfr!
IR
wireless head phone (optional}
i—i
CAS AUDIO (DVD OS VCD)
13
MT1EOT