Wall blind control set for busch-jaeger duro 2000 (7 pages)
Summary of Contents for Z-Wave.Me WIREN BOARD 7
Page 1
ZMEEWB7-ZW-ZB ZMEEWB7-ZW-ZB-KNX WirenBoard 7 full manual https://z-wave.me/manual/ wirenboard-7 Z-WAVE.ME WIREN BOARD 7 USER MANUAL...
Page 2
Zigbee Z-Wave Power Mod Out 2 2x Ethernet Mod Out 3 2x USB-C: Debug KNX** console + network Status LED Socket for input/output 1x MicroSD module 3x AI/DI/DO 5V out 1x DI/DO 1-Wire Modem GSM* 4G/NB-IoT (2x SIM) 2x RS-485 Wi-Fi/BLE USB Host V out...
Z-Wave chip, which provides the following is provided by a special expansion board and Z-Way modern features: software by the Z-Wave.Me. The controller has passed • direct line of sight transmission distance of 1.6 km Z-Wave certification, which guarantees compatibility in Z-Wave Long Range mode with all certified Z-Wave devices.
Page 4
Wait for the controller to load, the indicator will flash green KNX is designed for installation in large houses due • Go to https://find.z-wave.me to find out the IP to the reliability of the wired connection. address of the controller in your local network. •...
OPERATING THE DEVICE SmartHome UI is the main web interface for working with Z-Wave devices. SmartHome UI is used to manage devices and configure home automation scenarios.
Page 7
Expert UI is designed for advanced setup of Z-Wave devices. Allows you to get complete information about the Z-Wave network, to diagnose and optimize.
Page 8
WirenBoard UI is used to work with wired peripherals, manage system settings and configure hardware inputs/outputs.
TECHNICAL DETAILS ARM Cortex A7 4 core 1.2 GHz General DDR3 RAM 2 GB FLASH 64 GB TLC BiCS5 Width, DIN-units Dimensions Sizes (H x W х D) 106 x 90 x 58 mm Weight (with box) 235 g Air temperature 0 ...
Page 11
Ethernet 10/100 2 (the first of the ports with Passive PoE) USB Host (USB-A) USB network card for quick configuration of the controller. Debug Network (USB-C) Important: When the port is connected to the computer, USB 1 is disconnected Wi-Fi 802.11n 1 AP, client Communications Bluetooth 4.0...
Page 12
You can contact us using the form on the website https://help.z-wave.me or by writing to us directly by e-mail: info@z-wave.me support@z-wave.me...