Advertisement
How to Set the Program Start TIMER
Make sure that the clock has been set correctly before setting the program start TIMER.
Example: To set the TIMER for a program which begins at 10:30 PM on channel 12
Press TIMER/BLOCK once to change from
"normal page" to "clock page."
TIMER/BLOCK
Press TIMER/BLOCK before the "AM"/"PM"
indication disappears and summon "TIMER
page."
TIMER/BLOCK
Press 1, 0, 3, 0, AM/PM, ENTER.
Numbers will "wink" to indicate that the time has
been set.
Numbers will "wink" to indicate that the
4
Press 1, 2, ENTER (0-not necessary).
channel has been set.
2
The TIMER lamp will light up to indicate that the TIMER has
been set.
If you have made a mistake, press CLEAR and return to step 3.
At the preset time, the selected channel will appear on the screen
and the TIMER lamp will go out. The TIMER will operate whether
you are watching a TV program or a VCR playback, or even if you
have turned off the TV.
if no button is pressed within 2 hours after the preset time, an
"OFF" indication will appear on the screen for 1 minute. If a button
is still not touched during the 1 minute, the TV will turn off
automatically as a safety precaution.
20
>
ENTER
The TIMER operates only once, but the time and the channel will
remain in the unit's memory.
if you want to preset the same channel at the same time for a
future date, press OFF/REPEAT. The TIMER lamp will light up
to indicate that the TIMER has been reactivated.
if you want to deactivate the TIMER, press OFF/REPEAT
again so that the TIMER lamp goes out. It is not necessary to
summon "TIMER page" to use the OFF/REPEAT button.
Furthermore, this button is effective even if the TV has been
turned off.
To clear the TIMER setting, summon "TIMER page" and press
CLEAR.
To reset, clear the setting and follow the steps from step 3.
Advertisement
