Do you have a question about the Alpha TV Bed 3-0 and is the answer not in the manual?
Questions and answers
Summary of Contents for TVBed.co.uk Alpha TV Bed 3-0
Page 1
Alpha TV Bed 3-0 PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list in this guide. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
Page 2
Safety and Care Advice Assembly me: 1 Hour Warnings Before using the TV Lift please carefully read this Assembly Instruction Retain these instructions for future reference T ools are included when stated in the parts list - retain & occasionally check bolts are still tight This bed is for indoor use only Keep small parts out of reach of children The bed is intended for a maximum weight of 100kg per side (200kg combined)
Page 3
Safety and Care Advice Warning - Electrical Components Unplug the unit during lightning storms or when unused for long periods of time The main power plug & socket should be easily accessible - this is how the power is disconnected Plug the three pin power plug on the power lead into the socket in the footboard before switching on power at the wall socket, the socket must be earthed.
Fittings Checklist Code Description Code Description Cable Clips Bolts (M8x30mm) for fitting side panels (3) to headboard & footboard (1&2). Cable Ties Spring Washers (For M8 bolts) Allen Key (4mm) Flat Washers (For M8 bolts) Allen Key (5mm) Additional Tools Required Care &...
Page 5
Bed Assembly Stage Stage 10mm Loosely insert two bolts (A) with spring washers (B) and flat washers (C) into each side of headboard & footboard. Do not fully tighten the bolts, leave 10mm protruding as in the diagram. Fit the side panels (3 ) locating the brackets behind the flat washers. Once all four corners are located, make sure the bed is square then tighten the bolts 100% .
Page 6
OPERATING TV LIFT Stage STEP 1: TO RELEASE LOCK - PRESS DOWN GENTLY UNTIL LIFT COMES TO A STOP STEP 2: RELEASE & LET LIFT RISE TO THE TOP - DO NOT PULL IT UP NOTE: Gently pull out ALL the cables from inside the footboard - they are pushed inside during transit.
Page 7
TV ADJUSTMENT TV IS LEVELLED DURING MANUFACTURE. IF YOU EVER NEED TO DO IT Stage AGAIN, PLEASE FOLLOW THIS Allen Key (4mm) METHOD. UNLOCK SCREWS ADJUST SCREW WHEN TV IS LEVEL - LOCK SCREWS Page 7 of 9...
Page 8
CONNECTIONS Stage Connect the 3 Pin plug on the power extension lead (6) into the socket located at the bottom of the footboard (2), then connect to your wall socket. Note that the plug is earthed and the power supply socket must be earthed too. The plug connection must be easy to reach if you need to disconnect the power quickly.
INSTALLATION PLEASE NO TE THIS VERY IMPORTA NT INFORMATION: IT IS IMPORTANT THAT ANY AUXILLARY CABLES THAT YOU FIT YOURSELF ARE SECURELY POSITIONED CLOSE TO THE BACK OF THE TV USING THE CABLE CLIPS & CABLE TIES PROVIDED. THE CABLE CLIPS & CABLE TIES ARE PROVIDED FOR YOUR SAFETY AND THE SAFETY OF THE EQUIPMENT. THESE ARE TO PREVENT ANY ENTRAPMENT OF CABLES DURING THE OPERATING OF THE TV LIFT WHEN IT IS MOVING IN EITHER THE UP OR DOWN MODE.
Need help?
Do you have a question about the Alpha TV Bed 3-0 and is the answer not in the manual?
Questions and answers