Table of Contents
Advertisement
EX
nue of injector for grill burner
1.
Back wall
2.
Shut- off valve
3
4
6
5
3.
Grill burner
4.
Injector holder
5.
Injector
6.
Screw
1- Unscrew the screws fixing the rear
cover sheet (1) and shut-off valve
holder (2).
2- After removing the rear cover sheet
(1), you can reach the grill burner tube
(3) and grill injector holder (4).
3- Unscrew the grill injector holder(4)
fixing screw(6).
4- Unscrew the injector (5) and replace
it with appropriate injector, see injector
table, on page 7.
5 - Conduct leakage control after
replacing the injector.
6 - Assemble the injector holder (4)
into the grill burner tube (3).
7- Fix the injector holder by the screw
(6).
8- Assemble the rear cover sheet (1)
and shut-off valve holder (2).
Блоа of Injector for o oven n Durer
г Door switch
2- Oven burner
3- Screw (3 pieces)
4- Cut-off valve
5- Injector holder
6- Injector
7- Oven burner holder
8- Clips
18 | EN
Advertisement
Table of Contents
