Samsung HMX-Q20BN User Manual page 83

Using Auto Backup to send videos o_ _photos
About the Wakeup on LAN (WOL) featuD"e
WOL is a technology that allows YOUto turn on a PC _!-0re another location over a rlAtwA_ connection o_the lete!Tlet or to set a PC t° wake up flTorrlsleep
mode, With the WOL feature, you can adtornatically tuln on or wave up a PC with your camcorder by touching Auto Backup.
7 Click Start, and then open the Control Panel.
Configure the network connection.
Wirldows 7:
Click Network and Intemet _ Network and Sharing Center
Change adapter settings.
Wirldows Vista:
Click Network and Intemet _ Network and Sharing Center
Manage network connections.
Wirldows XP:
Click Network and hternet Connection _ Network
Connection.
:_ Right click Local Area, and then click Properties.
s/ Click Configure _ the Power manage tab _ Allow this
device to wake the computer.
Click OK.
(jl Restart the PC.
7 Turn on the PC and press F2 while the PC is booting,
o The BIOS setting menu will appear.
Select Advanced tab _ Power management Setup.
:_ Select Resume on PME _ Enabled.
s/ Press F10 to save your changes and continue booting.
/_ Click Start, and then open the Control Panel.
(jl Configure the network connection.
Windows 7:
Click Network and Internet _ Network and Sharing Center
Change adapter settings.
Windows Vista:
Click Network and Internet _ Network and Sharing Center
Manage network connections.
Windows XP:
Click Network and Internet Connection _ Network
Connection.
Wireless network (HMX QF20 only)
79