JVC AV-48WP34/AHA Service Manual page 30

AV-48WP30
(4) Setting method
1) UP / DOWN ( ▲ / ▼ ) FUNCTION key
Select the SETTING ITEM.
2) LEFT / RIGHT ( / ) FUNCTION key
Setting (adjust) the setting value of the SETTING ITEM.
When the MUTING key is pressed the setting value
will be stored (memorized).
3) EXIT key
Returns to the previous screen.
(5) Releasing SERVICE MENU
1) After returning to the SERVICE MENU upon completion
of the setting work, press the EXIT key again.
" WHITE BALANCE setting
The setting for 3.LOW LIGHT and 4.HIGH LIGHT are described in
the WHITE BALANCE page of ADJUSTMENT.
WHITE BALANCE key function
R.CUT OFF
(▲)
R.DRIVE
R.CUT OFF
(▼)
R.DRIVE
MEMORY
(MUTING
)
MENU key
FUNCTION key
(▲/▼) & ( / )
Select the setting value
Select the setting Item
24
SIGNAL
SYSTEM
ASPECT
SIZE
SETTING
ITEM
G.CUT OFF
(▲)
G.CUT OFF
(▼)
B.CUT OFF
(▲)
B.DRIVE
B.CUT OFF
(▼)
B.DRIVE
W.BALANCE
SETTING VALUE
(ON or OFF)
EXIT key
No. 51914
1.PICTURE/SOUND
NTSC FULL DYNAMIC LOW
A001 001 OFF FRAME
**** *********** **** ***********
**** *********** **** ***********
A01～ ～ ～ ～ A16 / S01～ ～ ～ ～ S57
D01～ ～ ～ ～ D20 / F01～ ～ ～ ～ F64
2.YC SEP
*** ***
*** ***
YC001
*** *** *** *** *** *** *** *** *** ***
*** *** *** *** *** *** *** *** *** ***
WHITE BALANCE
3.LOW LIGHT
LW-BAL
*** *** *** *** *** ***
*** *** *** *** *** ***
4.HIGH LIGHT
HW-BAL
*** *** *** *** *** *** *** ***
5.RF AFC
NOTE)
(
TUNER 2
TUNER 1(MAIN)/2(SUB)
AFC
AFC ON
*** *** *** ***
FINE
FINE
WHITE BALANCE
VIDEO STATUS
SETTING VALUE
DO NOT ADJUST
SETTING ITEM
YC001～ ～ ～ ～ YC107
SETTING VALUE
SETTING ITEM
・ ・ ・ ・ Setting Value
B.CUT OFF VALUE
G.CUT OFF VALUE
R.CUT OFF VALUE
SETTING ITEM
・ ・ ・ ・ Setting Value
B.DRIVE VALUE
・ ・ ・ ・ Setting Value
R.DRIVE VALUE
DO NOT ADJUST
Select ON/OFF
FineTuning(-77～ ～ ～ ～ +77)
AFC ON:Auto Setting