Siemens ED HSC Series Information For Use page 12

Table of Contents

Advertisement

en Keep-warm function1
13.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
13.2 Switching on shortBoost
Requirement: Assign the function to
→ "Favourite button", Page 10.
14  Keep-warm function
You can use this function to melt chocolate or butter,
and to keep meals warm.
You can activate the function via Home Connect or Fa-
vourite button.
14.1 Switching on Keep-warm function
Requirement: Assign the function to
→ "Favourite button", Page 10.
Select the required cooking zone.
1.
15  fryingSensor
This function allows you to melt, prepare sauces, sauté,
deep fry or fry while keeping the temperature under
control.
Instead of constantly adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas-
ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol
⁠ .
Functions
Temperature
Melting
70 - 80 ºC
Preparing sauces
110 - 120 ºC
Frying
140 ºC
Frying
160 ºC
Frying
180 - 200 ºC
Frying
220 ºC
15.1 Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
Cookware
Frying pan, 15 cm dia-
meter
1
Available depending on software version. Further information on availability can be found on the website.
12
.
1
.
Recommended cooking
zone
Single cooking zone
Select the cooking zone.
1.
Touch
⁠ .
2.
lights up.
a
a The function is activated.
13.3 Switching off shortBoost
Select the cooking zone.
1.
Select the power level.
2.
goes out
a
a The function is switched off.
Note: To avoid high temperatures, this function auto-
matically switches itself off after 30 seconds.
Touch
⁠ .
2.
lights up.
a The function is switched on.
14.2 Switching off Keep-warm function
Select the cooking zone.
1.
Set to
2.
goes out.
a The function is switched off.
Cookware
Frying pan, 19 cm dia-
meter
Frying pan, 21 cm dia-
meter
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
siemens-home.bsh-group.com.
Note: You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
15.2 Switching on the fryingSensor
Place the empty cookware on a cooking zone.
1.
Select the cooking zone.
2.
Press
⁠ .
3.
a ,
and the preset temperature light up on the dis-
play for the selected cooking zone.
Select the temperature by swiping your finger over
4.
the settings area.
a
flashes until the set temperature is reached again.
a The selected temperature and the development of
the temperature reached in the pan flash alternately
until the selected temperature has been reached.
a The temperature shown on the displays is approxim-
ate and may differ from the actual temperature in
the frying pan.
Recommended cooking
zone
Single cooking zone
Single cooking zone

Advertisement

Table of Contents
loading

Table of Contents