PRODUCT CODE: DLW4510 2-Pin Plug + Socket Connection Holman Warm White Deck Lights use a 2-Pin Plug + Socket connection. Only other Holman 2-Pin Plug + Socket products are compatible with these lights. These lights are not compatible with other brands and will void your warranty if used with other brands.
Overview Introduction Thank you for purchasing Holman 45mm Warm White Deck Lights. Our system is completely DIY and designed to help illuminate and add ambience to your outdoor space. These can also be used to light up wooden steps or create a safety barrier around the edge of your decking.
Setup Choosing your controller Holman have a range of lighting controllers to suit all users. Choose the correct Warm White Lighting Controller that suits your requirements. Warm White Wi-Fi Garden Light Controller Our latest Lighting Controller features Wi-Fi connectivity, allowing access to your Garden Lights from anywhere in the world.
1. Install the Lighting Controller [a] near a 240V AC power point ideally located in a house, garage, or exterior electrical cubicle ® All Holman controllers have a 60w capacity. Lighting set-ups that include more that 60w of garden lights will require additional controllers...
Once the Lighting Controller is mounted, you can connect your main lighting cable. This cable is where you will ‘branch’ off your Deck Lights or other Holman lighting products. 1. Connect your first Extension Cable [a] to the Lighting Controller [b] 2.
Installation Connection Tee Each pack of Deck Lights comes with a Connection Tee. This is what connects your Deck Lights to the main lighting cable. 1. Join one end of the Connection Tee [a] to the Extension Cable [b] 2. Secure the Connection Tee by hand tightening the weather proof end cap [c] 3.
Installation Deck Light Spacing Deck Lights come with 1800mm of space between each light when connected. Before installation, we suggest marking your decking exactly where you want to install your lights to ensure the spacing is correct. 1800mm 1800mm 1800mm 1800mm 1800mm 900mm...
Installation Drilling Holes Deck panels will need to be 2. Drill the required holes removed to hide lighting cables into your deck that were underneath. For safety, we marked previously [a] also recommend removing deck panels to ensure no other cabling is behind. ®...
Installation Inserting Deck Lights 1. Insert both cable ends of one of your Daisy-Chain Deck Lights [a] through the first drill hole 4. Insert the rest of your Daisy-Chain Deck Lights into your deck using steps 1 and 2 2. Push the Deck Light into 5.
2. Extension Cable 5. End Deck Light 3. Connection Tee The Holman website has a host of additional information on features. Head to support.holmanindustries.com.au for more tips, tricks and support content. If you still need help, feel free to email our friendly Customer Service team at support@holmanindustries.com.au...
Installation Inserting Multiple Deck Light Packs 1. Attach your second Extension Cable [a] to the free end of your first Connection Tee [b] ® If you are continuing your row of Deck Lights from earlier, ensure that this Extension Cable is long enough to reach from your first Connection Tee, to your next empty deck light space 2.
Page 13
Installation Existing System Extension Pack #2 Lead 13 of 16...
Warranty 2 Year Replacement Guarantee Holman Industries offers a 2 year To the extent permitted by law, this Holman replacement guarantee with this product. Replacement Guarantee excludes liability for consequential loss or any other loss or damage caused to property of persons In Australia our goods come with arising from any cause whatsoever.
Need help?
Do you have a question about the DLW4510 and is the answer not in the manual?
Questions and answers