Table of Contents
Advertisement
PLAYBACK
Normal Playback
(Numbers refer to the steps below)
OO EET
TOTTORI
ESS
he
i ei a
AC
@
Set the TIMER switch to OFF.
@
Switch the POWER on.
@
Set the TAPE selector for the tape type:
NORM, CrO2, [METAL], or FeCr.
@
Set the Dolby NR
switch to:
IN for tapes recorded with Dolby NR.
OUT for other tapes.
Note:
The
IN and MPX
OFF
positions give the
same operation in playback.
Auto-repeat Playback
The PC-E70 can play a tape then automatically rewind
@
Switch on the POWER.
@
Followsteps 3 to 6 of Normal Playback, above.
©
set the TIMER switch to PLAY REPEAT.
@
(A) For Playback—rewind—playback:
Press the PLAY button.
(B) For rewind—play—rewind:
Press the REW button.
button.
;
:
Note:
If the TIMER
switch is left in the PLAY/-
REPEAT position when the deck is switched
off. Auto-repeat
playback
will start auto-
matically when the POWER is next switched
on.
PC-E70
Timer Recording
1
Set up the cassette deck and amplifier, tuner, etc.
for normal recording:
@
Set the TIMER switch on the PC-E70 to OFF.
@
Switch on the POWER.
@
Insert a cassette with a tab on the side to be
recorded.
@
Set the TAPE selector and Dolby NR selector.
©
Precisely tune to the desired radio station.
@
Preset
the
recording
level,
after pressing the
PAUSE/MUTE then the REC and PLAY buttons.
2
Set the audio timer to the desired recording start
time, and also set it to switch off the power to the
system.
3.
Leave the PC-E70 POWER switch on.
4
Set the TIMER switch to REC.
recording will start.
Timer Playback
(for morning alarm, etc.)
1.
Play the tape to be used for the morning alarm and
adjust the amplifier volume
control
to a suitable
volume level.
2.
Set the audio timer to the desired alarm time, and
also set it to switch off the power to the system.
3.
Set the tape deck
TIMER
switch
to the PLAY
position.
When the preset alarm time is reached, the tape deck will
automatically start playback.
Note:
When playback starts the PC-E70 will play in the
auto-repeat mode until stopped.
When the auto-
repeat
mode
is no
longer
required,
set the
TIMER switch to the OFF position.
PC-E70
|
2. Remove two screws (C) from rear panel of unit.
(See Figure 15)
3. Lifting the Top Cover upright, pull it back wards and
the Top Cover can be removed out.
e (A)
¢
ne
met
gee
ee
we
OS mm
5 an
Figure 14
Figure 13
Ceca
eeystid Satie teh gh aha
OH OF DP RERE PAREN ELSE
IRN ,
Bottom Cover Removal
1. Remove the Top Cover.
:
:
2. Remove five screws (D) from the bottom plate.
(See Figure 16)
2
3. Remove two screws (E) from side of the unit. (See
:
F
Figure 15
Figure 17)
Figure 16
F (E)
Figure 17
Advertisement
Table of Contents
