Horizon Fitness 43HL7590U/C User Manual page 32

details and provides better contrast perception.
It makes higher depth impression by enhancing
dark and bright areas without any detail loss. Set
your Local Contrast Control preference as Low,
Medium, High .
Flesh Tone: Adjusts the skin tone brightness.
Set your preference as Low, Medium, or High
to enable. Set as to disable.
DI Film Mode: It is the function for 3:2 or 2:2
judder) which are caused by these pull down me-
thods. Set your DI Film Mode preference as Auto
or . This item will not be
available if Game Mode or PC Mode is turned on.
Blue Stretch: Human eye perceives cooler whites
as brighter white, Blue Stretch feature changes
White balance of mid-high grey levels to cooler
colour temperature. Turn the Blue Stretch function
Game Mode: Game mode is the mode which cuts
down some of the picture processing algorithms
to keep up with video games that have fast frame
rates.
ALLM: ALLM (Auto Low Latency Mode) function
allows the TV to activate or deactivate low latency
settings depending on playback content. Highlight
this option and press OK to turn the ALLM function
PC Mode: PC Mode is the mode which cuts down
some of the picture processing algorithms to keep
signal type as it is. It can be usable especially for
RGB inputs.
De-Contour: Decreases the contour effects in
low-resolution content and auto streaming services.
Set your preference as Low, Middle, or High to
enable. Set as to disable.
MJC: Optimises the TV's video settings for motional
images to acquire a better quality and readability.
Highlight this option and press OK to see available
options. , Demo Partition, and Demo options
will be available. Set the option to Low,
Middle, or High to enable the MJC function. When
enabled, Demo Partition and Demo options will
become available. Highlight Demo Partition and
press OK to set your preference. All, Right and
Left options will be available. Highlight Demo and
press OK to activate the demo mode. While the demo
mode is active, the screen will be divided into two
sections, one displaying the MJC activity, the other
displaying the normal settings for the TV screen. If
the Demo Partition option is set to All, both sides
will display the MJC activity.
HDMI RGB Range: This setting should be
adjusted according to input RGB signal range on
English - 19 -
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Low Blue Light: Electronic device screens emit
blue light that can cause eye strain and may lead
to eye problems over time.
of blue light set your preference as Low, Middle,
or High. Set as to disable.
Colour Space: You can use this option to set the
range of colours displayed on your TV screen. When
set as On, colours are set according to the source
signal. When set as Auto, the TV decides to set
to source signal type. When set as
, the TV's
maximum colour capacity is used by default.
Colour Tuner: Colour saturation, hue, brightness
can be adjustable for red, green, blue, cyan, magen-
vivid or more natural image. Set the HUE, Colour,
Brightness, and Gain values manually. Hig-
hlight Enable and press OK to turn this function on.
11 Point White Balance Correction: White ba-
lance feature calibrates TV's colour temperature in
detailed grey levels. By visually or measurement,
grey scale uniformity can be improved. Adjust the
strength of the Red, Green, Blue colours and Gain
value manually. Highlight Enable and press OK to
turn this function on.
Reset to Default: Reset the video settings to factory
default settings.
Note: Depending on the currently set input source some menu
options may not be available.
Sound
System Sounds: System sound is the sound
played when navigating or selecting an item on the
TV screen. Highlight this option and press OK to
Sound Style: For easy sound adjustment, you
can select a preset setting. User, Standard,
Vivid, Sports, Movie, Music and News options
will be available. Sound settings will be adjusted
according to the selected sound style. Some other
sound options may become unavailable depending
on the selection.
Balance: Adjust the left and right volume balance
for speakers and headphones.
Sound Surround: Turn the surround sound feature
Equalizer Detail: Adjust the equalizer values accor-
ding to your preferences.
Speakers Delay: Adjust the delay value for speakers.
eARC: Set your eARC preference. and Auto
options will be available. Set as to disable.
Digital Output: Set the digital sound output prefe-
rence. Auto, Bypass, PCM, Dolby Digital Plus and
Dolby Digital options will be available. Highlight the
option you prefer and press OK to set.
Digital Output Delay: Adjust the digital output delay
value.
Auto Volume Control: With Auto Volume Control,
you can set the TV to automatically level out sudden
adverts or when you are switching channels. Turn
OK.
Downmix Mode: Set your preference to convert mul-
ti-channel audio signals to two-channel audio signals.
Press OK to see the options and set. Stereo and
Surround options will be available. Highlight the
option you prefer and press OK to set.
DTS DRC: Dynamic Range Control provides gain
adjustment of the source to maintain suitable au-
dible range at both low and high playback levels.
OK.
Dolby Audio Processing: With Dolby Audio Proces-
sing, you can improve the sound quality of your TV.
Press OK to see the options and set. Some other
sound options may become unavailable and appear
as greyed out depending on the settings made here.
Set the Dolby Audio Processing option to
you would like to change these settings.
Dolby Audio Processing: Highlight this option
and press OK
Sound Mode: If the Dolby Audio Processing
option is turned on Sound Mode option will be
available to set. Highlight the Sound Mode option
and press OK to see the preset sound modes.
Game, Movie, Music, News, Stadium and Smart
options will be available. Highlight the option you
prefer and press OK to set.
Dolby Atmos: Your TV supports Dolby Atmos
technology. By means of this technology the sound
moves around you in three-dimensional space, so
you feel like you're inside the action. You will have
best experience if input audio bitstream is Atmos.
OK.
DTS Virtual:X: This feature will enhance your sound
experience by providing a virtualisation of surround
Highlight Vir-
speakers through your TV's speakers.
tual:X and press OK. TruBass and Limiter options
will become available. Highlight each option and
press OK
may become unavailable and appear as greyed
out depending on the settings made here. This
item will not be available if Dolby Audio Processing
is turned on.
English - 20 -
Reset to Default: Resets the sound settings to
factory defaults.
Storage: View the total storage space status of the TV
and connected devices if available. To see detailed in-
formation on the usage details highlight and press OK.
There will also be options for ejecting and setting up
the connected USB storage devices as device storage.
Eject: To keep your content safe, eject your USB
storage device before you unplug it from your TV.
Erase & format as device storage: You can use
the connected USB storage device to extend the
storage capacity of your TV. After doing this, that
device will only be usable with the TV. Follow the
on-screen instructions and read the information
displayed on the screen before proceeding.
Note: Formatting the connected storage device will erase
before you proceed with formatting the device.
Erase & format as removable storage: If you did
priorly format your USB storage device as device
storage, it will only be usable with your TV. You
can use this option to format it again in order to
use it with other devices. Before proceeding with
the formatting, you may consider backing up the
data on your device to your TV's internal storage
or to another USB storage device using the Back
up apps option. Otherwise, some apps may not
work properly after formatting. Follow the on-screen
if
instructions and read the information displayed on
the screen before proceeding.
Note: Formatting the connected storage device will erase
before you proceed with formatting the device.
You can also go to the section on the
Home Screen after connecting your USB device to
your TV to see the available options. Highlight the
and press OK.
Browse: Opens the Storage menu.
Setup as device storage: Has the same functio-
nality as the Erase & format as device storage
option described above.
Eject: Same as described above.
Home Screen: Customise your Home Screen. Select
channels which will be displayed on the Home Screen,
enable/disable video and audio previews. Organise
apps and games, change their order or get more of
them. Display open source licences.
For some countries, the Home Screen will be orga-
nised into several tabs and this menu will contain
additional options to customise the content of these
tabs. Highlight Set up and press OK to sign in to a
Google account, so you can browse personalised
recommendations for that account in the Discover
tab on the Home Screen. After signing in, using