Table of Contents
Advertisement
Programmes and buttons
en
á 3 sec.
(Settings):
Remote Start }
Memory 1
Memory 2
Start/Pause Ü
--------
30
Press the two selection buttons at the same time and hold them for 3 seconds. The
menu will be displayed on the display panel.
End signal or button signal
Select the programme end signal volume or the button signal volume. Signal: Off –
Quiet – Medium – Loud – Very loud.
Default setting: Loud
Autom. switch off
Time after which the dryer automatically switches off once the programme has
ended: Never, 15, 30 or 60 min. Default setting: 15 min
Note:
If you have switched Wi-Fi on, the automatic switch-off is set to Never.
Language
Select the language you require on the display panel.
Enables the appliance to be started remotely via the Home Connect app.
Remote start remains enabled for 24 hours after it has been activated. It will be
deactivated automatically if you do not start the programme via the
Home Connect app during this time. If you carry out any operations on the appliance
itself, such as opening the door or selecting a different programme, the remote start
button will be deactivated for safety reasons.
Notes
Remote start can only be activated if the appliance door is closed.
■
Remote start cannot be activated if the childproof lock is on.
■
Press and hold the button for more than 3 seconds to access the Home Connect set-
tings .
You can save individual programme settings under Memory 1 and 2.
Select the required programme settings and press the Memory 1 or Memory 2 but-
ton for 3 seconds until the display panel shows Memory programme 1 or 2
saved.Your selected programme settings will be retained even after the dryer has
been switched off.
Default setting: No Memory programme saved.
If you have not saved a Memory programme, you will not be able to view it via
Note:
the Home Connect app.
Starts or pauses the programme.
Advertisement
Table of Contents
