Speaker Impedance - Technics SD-S948 Operating Instructions Manual

m
%
Speakercables
Amplifier
To prevent damage to circuitry, never
short-circuit p osilive(+) andnegative(-)
[]
• Speaker Impedance
The£mpedance ofanyspeaker u sed with this u.mt m ust b e8
1. Sound will only come out when the SURROUNDmode of the
Dolby ProLogicSystemor SFCfunctionis on.
2. If only one of the surround speakers is connected, no sound will
comeout. Be sure to connect bothspeakers. ,
3. Do not connect the surround speakers to the front speaker
terminals. T he surround speakers maybe damagedif connected
to the front terminals due to the output power difference
betweenthe frontand surround terminals.
• Speaker Impedance
The impedance of any speaker used with this unit must be 4-8 D.