Table of Contents
Advertisement
Controls, indicators and connectors
2
=
!
ares
nee
@ POWER
switch
By pressing this switch, the power
of the unit and the
power of the equipment connected to the SWITCHED AC
outlet can be switched ON/OFF.
When this switch is pressed, the function selected last or
the last station to be received will be displayed. You can
operate the switch from a distance with the RC-70 (remote
control unit).
@ REMOTE
POWER
STAND
BY indicator
Lights when the power cord is connected to the AC outlet.
When
this indicator is lit, the POWER
switch or POWER
key of the remote control unit can be operated.
© REMOTE
SENSOR
Point the supplied remote control unit towards this sensor
and operate.
© PHONES jack
Stereo headphones are plugged into this jack.
© SPEAKERS
switch
A. B OFF
- This position silences all speakers to permit
private use of headphones.
AON
- Activates speakers connected to the SPEAKERS
A terminals on the rear panel.
BON
- Activates speakers connected to the SPEAKERS
B terminals on the rear panel.
A, B ON
- Activates speakers connected to the SPEAK-
ERS A and B terminals simultaneously.
Note: ———_____--
When the SPEAKER A and B switches are used at the same time,
the speakers connected to the SPEAKERS A and B terminals are
connected inseries. In this respect, whenever using the SPEAKER
A and
B switches at the same
time. be sure that two pairs of
speakers are connected to the terminals A and B, otherwise no
sound is Output.
© INPUT SELECTOR
switches
TAPE
1 - Used to play back a tape deck connected to
TAPE 1 jacks.
TAPE
2 — Used to play back a tape deck connected to
the TAPE 2 jacks. (The TAPE-2 switch is operated in
priority to any other audio input switches.)
VIDEO
1 - Selects the video recorders connected to the
VIDEO 1 jacks.
VIDEO
2 - Select the video recorders connected to the
VIDEO 2 jacks.
TUNER
~— Selects
the
tuner
mode
for
FM
or
AM
reception.
10.
KR-ABIR (K)
CD - Selects the source connected to the CD jacks.
PHONO
- Selects
the program
source
played
on the
turntable.
Note:
——______________-—-
If the setting of the INPUT SELECTOR switch cannot be changed,
press other INPUT
SELECTOR
switch, then press the desired
INPUT SELECTOR switch again.
@ GRAPHIC
EQUALIZER switch
Press this switch to ON and the frequency characteristic
will be modified by passing through the graphic equalizer.
In the DEFEAT
position,
the frequency
characteristic
remains unchanged.
The ON indicator lights when the switch is set to ON.
© AUTO/MANUAL
(MONO) switch
Press this switch to select the tuning mode between AUTO
or MANUAL
(MONO).
in MANUAL
(MONO)
mode,
FM
stereo broadcast is received in monoural.
© DIRECT key
Press this key while listening to a radio broadcast to set
the unit to the direct tuning mode so that the frequency
of the desired station can be entered with the numeric keys.
Press to set to the direct input standby mode. Press again
to return to the last memory of the tuner.
@ PRESET SCAN
key
Use this key for preset channel scanning. When a frequen-
cy stores in the preset memory is being received, pressing
this key shifts the reception to the next frequency in the
preset memory. (The preset channels are scanned
in the
order A-1, ...., A-0, B-1 ...., B-0.)
@ BALANCE
control key
Governs the amount of sound coming from each paired
speakers to get optimum stereo effect.
Pressing
the RIGHT
key will decrease
the left channel
volume and pressing the LEFT key will decrease the right
channel volume. When the BALANCE
control is pressed,
display window shows the BALANCE
indicator.
@® MUTING
switch
When the muting switch is pressed, the MUTING in dicator
in the display window will flash, and the overall listening
sound level is reduced by — 20 aB.
When the switch is pressed again, you can restore exact ly
the same listening level as before.
Advertisement
Table of Contents
