Table of Contents
Advertisement
Use either the television's
own tuner or a cable box to select channels. Set this switch to TV to
operate the television's
built-in tuner. Move the switch to CATV to operate a cable box.
Note:
• See page 19 for information on programming
your remote for cable box operation.
You can control a VCR or DVD ptayer with the buttons on the Iower part of the remote controI.
Move the slide switch to VCR or DVD to operate.
Notes:
• The remote is preset with the code 000 to control JVC-brand
VCR%. For any other
manufacturer's
brand VCR, ptease see the code chart and instructions
on page 20.
• The remote is preset with the code 000 to control JVC-brand
DVD ptayers. For any other
manufacturer's
brand DVD player, please see the code chart and instructions
on page 21.
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward,
stop, pause, channeI scan, TV/VCR,
power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand
VCR%. For any other
manufacturer's
brand VCR, ptease see the code chart and instructions
on page 20.
Im_VAm]l:r!3i;_J_J
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward,
stop, stilI/pause, previous/next,
tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand
DVD ptayers. For any other
manufacturer's
brand DVD player, please see the code chart and instructions
on page 21.
Advertisement
Table of Contents
