Operation - Kenwood KAC-728S Instruction Manual

Hide thumbs Also See for KAC-728S:
Table of Contents

Advertisement

@ FILTER switch
These switches allow filtering of the
speaker output signals.
KAC-7288/6088/428S
KAC-628
FILTER
OFF
OFF
LPF
HPE,
¢ OFF position
The original sound without filtering is
output.
@ OPERATION
switch
This switch allows selection of the
amplification method of input signals.
OPERATION
STEREO MONO(Lch)
L+R
STEREQ | MONO{Lch)
=
me eo
¢ STEREO position
The amplifier can be used as a stereo
amplifier.
- L+R position (KAC-628 only)
The input left and right signals are
combined before being amplified. Use this
position when the unit is used for
subwoofer speakers or the L+R (monaural)
sound is required.
:
* MONO (Lch) position
Amplifies the signal input from the left side
only. Set to this position and make bridged
connections to use as a high-power
monaural! amplifier. (The input right signal is
not output.)
unit, or to the maximum power output of
the genuine-accessory car stereo.
Use the diagram on the
4
*{@)
refer to the "Specifications"
in the instruction manual of the center unit.
© LINE IN terminal
© Speaker level input terminals
@ Fuse (20 Ax 2: KAC-728S)
(25
Ax 1: KAC-628/608S})
(15
Ax 1: KAC-428S)
:
Battery terminal
@ Ground terminal
Power control (REMOTE) terminal
° Stereo Connections:
;
When you wish to use the unit as a stereo
amplifier, stereo connections are used.
The speakers to be connected should have
an impedance of 2Q or greater. When
multiple speakers are to be connected,
ensure that the combined impedance is 2Q
or greater for each channel.
Bridged Connections:
When you wish to use the unit as a high-
output monaural amplifier, bridged
connections are used. (Make connections
to the LEFT channel (+) and the RIGHT
.
channel (-) SPEAKER OUTPUT terminals.)
The speakers to be connected should have
an impedance of 4Q or greater. When
multiple speakers are to be connected,
ensure that the combined impedance 4s 4Q
or greater.
:
The rated input of the speakers should be
no less than the maximum output of the
amplifier. Otherwise malfunction may
result.
English &

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kac-628Kac-608sKac-428s

Table of Contents