Page 1
The copyright of the user manual is owned by GSK CNC Equipment Co., Ltd (Hereinafter referred to as GSK).It is against the law for any organization or individual to reproduce this manual in any form without the permission of GSK and GSK reserves the right to investigate its law duty.
Page 4
GSK ZJY Series Spindle Servo Motor PREFACE Dear user: It’s our honor that you select GSK ZJY serial spindle servo motor (Hereinafter referred to as motor). For safety of the motor and the product and for the normal and effective running, please read the manual carefully before installing and using the product.
7. It is forbidden to move the motor by dragging the wire (cable), the motor shaft or the encoder. 8. GSK does NOT take any responsibility for any change on the product by the user, and the warranty bill becomes invalid.
——The user should be in charge of the danger resulted from the operation, adjusting, maintenance, installation and storage which are not complied with the manual regulation. The manual is kept by the end user. Thank you for your friendly support during using GSK product.
GSK ZJY Series Spindle Servo Motor CONTENT PREFACE ........................II SAFETY PRECAUTION ..................III RESPONSIBILITY ....................IV ⅠPRODUCT CHARACTERISTICS ..............1 Ⅱ RUNNING CONDITIONS ................. 1 Ⅲ MODELS of the MACHINE ................1 Ⅳ MAIN TECHNICAL PARAMETERS and OVERALL DIMENSION of the MOTOR........................
GSK ZJY Series Spindle Servo Motor Ⅰ PRODUCT CHARACTERISTICS GSK ZJY spindle servo motor is a new type of three phase inductive motor with high performance and adopts insulation structure of F level, corona resistance enameled wire dedicated for the frequency conversion motor and the encoder with high speed and precision, and the motor is researched, developed and manufactured by GSK.
GSK ZJY Series Spindle Servo Motor Ⅳ MAIN TECHNICAL PARAMETERS and OVERALL DIMENSION of the MOTOR 4.1 Refer to list 1 about the main technical parameters and overall dimension of the motor. main technical parameters and overall dimension of the motor List 1 The SPEC.
Page 12
GSK ZJY Series Spindle Servo Motor SPEC ZJY265-18.5B ZJY208-3.7B ZJY208-5.5B ZJY208-7.5B ZJY265-7.5BM ZJY265-11BM ZJY265-15BM ZJY265-22BM ITEM Three phase AC 380V Cooling fan Three phase AC 380V 50Hz 70W 0.21A power supply 50Hz 40W 0.14A Overall 180h7 180h7 180h7 230h7 230h7...
Page 13
GSK ZJY Series Spindle Servo Motor 45° φD 4-φI Flange installation type(B5) 4-φZ Footing installation type(B3) 45° φD 4-φI 4-φZ Flange and footing installation type(B35)...
Page 14
GSK ZJY Series Spindle Servo Motor 4.2 Dimension of the standard key slot 4.2.1 ZJY182-1.5BH, ZJY182-2.2BH, ZJY182-3.7BH, ZJY208-3.7B and ZJY208-2.2AM The configuration keys: GB/T 1096 Keys: 8×7×50 About the dimension of the shaft end key slot, refer to the following figure: -0.2...
Page 15
GSK ZJY Series Spindle Servo Motor 4.2.4 ZJY265-18.5BM and ZJY265-22BM The configuration keys: GB/T 1096 Keys: 16×10×90 About the dimension of the shaft end key slot, refer to the following figure: φ55h6 -0.01...
GSK ZJY Series Spindle Servo Motor Ⅵ CONNECTION and INSTALLATION of the MOTOR Connection of the motor and the drive unit 6.1.1 The three phase winding of the motor U, V, W and the cabinet (grounding) are led out by the cable fixed head, and about the position relation in the terminal box, refer to figure 3.
Page 18
GSK ZJY Series Spindle Servo Motor List 3 Encoder Cabinet lead (grounding) Socket NO. Socket (Welding side) sketch map 6.2 Installation of the motor If the motor should run at the speed above 2000r/min, it’s recommended to use the motor of optic axis and the pulley is fixed by the expansion sleeve.
(on the basis of the dispatch voucher) if the motor is damaged or can’t be used normally due to the quality. Remark 1: The listed motor modals in the manual are recommended by GSK, which can be used in many situations. If the user has some new requirements, GSK can provide the motor of the other specifications based on your requirements.