Maintenance and repair
The fan must be disconnected from the power supply before maintenance or repair. The motor impeller must be stopped. Safety
regulations must be complied with. To ensure a long lifecycle, the inside of the fan should be cleaned once per year. If the fan isn't
running, interrupt the power supply for a few minutes and try again. The motor requires approximately 20 seconds to go through its
self-checking process before the motor restarts. If the fan still does not work, please contact your dealer.
Declaration of Conformity
C E
Manufacturer: Prima Klima Trading CZ, s.r.o.; Zämosti 594; 33828 Radnice, Czech Republic
hereby confirms that the fans listed in this document comply with the requirements of the following guidelines:
Machinery Directive 2006/42/EC Annex II B; Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC
The following guidelines are consistent with:
EN 60204-1: 2006; ENIS012100: 20110 Safety of Machinery; General Principles for Design
EN 13857 Safety of Machinery; Safety distances in the danger zone of the upper and lower limb
EN60.335-1 Electrical equipment for domestic use and similar purposes; Part 1 General Requirements
EN 60529 Protection class of housing IP CODE
EN61000-6-2 Electromagnetic compatibility of EMC
PRIMA
KLIMA
TRADING CZ, s.r.o., Zämosti 594, 33828 Radnice, Czech Republic, info@primaklima.com , Tel.: +420 371 795 340
www.primaklima.com