To prevent fire or shock hazard, Do not use this plug with an extension cord, Receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. To prevent fire or shock hazard. Do not expose this appliance to rain or moisture.
Page 3
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time.
PREPARATION FOR USE Remove the stereo carefully from the box, retaining the packaging for future use. Read these instructions carefully before use. AC POWER OPERATION Unravel the AC cord and connect it to a convenience located AC outlet. Press the Standby/on/Alarm/off button to switch the unit off or on.The Clock Display will show 12:00 and needs to be set.
Turn the Buzzer/Tuner/CD button to Tuner position, and press FM /AM button to the desired band (AM or FM) and tune a station by turning the TUNING control. When a strong FM stereo signal is received, the FM ST. indicator will light and the sound will be heard in stereo. Adjust the VOLUME control as desired.
Page 7
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc.
Notes:After the disc compartment is fully closed, the disc information may not appear on the display. This means that the disc is improperly loaded (most likely it is upside down). To check, open the disc compartment again and reload the disc.
To temporarily stop disc play (pause mode), press the Play/Pause button. Disc play will stop at the current play position. The track playing time will flash. To resume disc play, press the PLAY/PAUSE button again. REPEAT/RANDOM DISC PLAY Use the REPEAT/RANDOM button to listen to an entire disc, one track repetitively.
- To clear the memorized tracks,press the PROGRAM button to enter the Program mode (PROGRAM indicator will blink) and then press STOP button or open the CD door as explai- ned. - Programming is the ability to select the order in which a series of tracks will be played.
Page 11
TO SHUT THE ALARM OFF Press the STANDBY/ON button to stop the Alarm ring immediately. Press the SNOOZE button, the SNOOZE indicator will light. The Alarm ring will be stopped should be continue ringing after 6mins. TO ACTIVATE THE SLEEP FUNCTION Your CD micro system can be set to switch off automatically afer a preset period of between 15 and 90 minutes.
MAINTENANCE AND CARE Electronic products of this kind should never be subjected to extreme temperatures or high humidity. For instance, this set should not be placed in bathing areas or around stoves and radiators. If necessary, clean the unit with a piece of cloth dampened with water only (Be sure the AC Power Cord is disconnected from the Mains).
AC CONNECTION Plug the power cord into an AC outlet having 120v,60Hz only. Connecting this unit to other power sources may damage the unit. NOTES: *The AC polarized plug helps to minimize the possibility of electric shock. If the polarized plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade;...
Need help?
Do you have a question about the TCR4964 and is the answer not in the manual?
Questions and answers