Advertisement
remaining tracks on the disc can be selected.
Normaily the elapsed playback time of the current track is
displayed. If the button is pressed once, the
in-
dicator lights and the remaining time left to play on the
track
is displayed.
If the
button
is pressed
again,
the
SINGLE | indicator goes out, and the
[TOTAL | indicator
goes on, and the playback time for the remaining tracks left
on the disc is displayed. If the button is pressed once more,
the
TOTAL | indicator goes out and the display returns
to the elapsed playback time for that track.
If the button is pressed so that the
LTOTAL
Jindicator lights
during programmed playback, the playback time for all of
the remaining programmed tracks is displayed.
All Button (ALL)
e@
Press this button to repeat playback.
@
When
the
[ALL] button is pressed, the
[REPEAT ] indicator
lights and
repeated
playback
is performed for all of the
tracks on the disc. During programmed playback, all of the
tracks
programmed
into memory
are played
repeatedly.
Press
the
[REPEAT | button
again
to cancel
the
repeat
operation.
One Track Repeat Button (1)
@
Press this button
when
desiring
to replay
1 track only.
Pressing this button while a track is playing will cause the
player to replay that track only. (Refer to page 8).
A-B Repeat Button
(A — B)
@
Press this button to perform repeated playback of a desired
section between two specified points. (Refer to page 8 for
details.)
Index Button (INDEX)
e@
Press this button when
playing from the index within the
tracks. Specify the index No. from the ten key pad.
Clear Button (CLEAR)
e
Use this key to make corrections in the programmed tracks.
Call Button (CALL)
@
Press this button to verify the track numbers that have been
programmed into memory.
Program and Direct Button (PROG/DIRECT)
@
Press this button to select the memory program function or
direct track selection function.
+10 Button (+10)
@
Press this button to select a track number that is larger than
11.
e@
The +10 button is used in conjunction with the ten-key pad
@. For example, to select track number 15, press the
button and then{S]on the ten-key pad.
@
Similarly, to select track number 32, press
[+10]
, [+10],
+10] and then press [2].
Ten key red (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
These buttons are pressed for direct track selection or to
Program a selection
into memory.
For example, to play
back
the third track
using the direct selection function,
press
[3] on the key pad. Track number
3 will then start to
play. To play track number
12, press
[+10]
and then
:
@
To use the keypad in program mode, first press the (PROG/
DIRECT) button
@® to enter the correct mode.
Play Button
( » PLAY)
e
Press this button to play a disc.
@
When the PLAY button is pressed, the [PLAY]
indicator
lights, and the number
of the track being played, the index
number, and the elapsed playback time for that track are
displayed.
The
calendar
lights to display
the all of the
playback tracks. The displayed tracks then go out in order
as each finishes playing.
@ When playback of the last track has finished, the
indicator goes out, and the machine enters stop state.
@
It is also possible to use the PLAY button to close the disc
holder after a disc has been inserted. Playback then begins.
@®
pene Button
( Il
PAUSE)
Press this button to stop the playback temporarily.
e
If the PAUSE button is pressed during playback, the play is
stopped temporarily, the
[PBPLAY]
indicator goes out, and
the
[LILPAUSE
indicatortinhdiae- -
e
To end the pause, push the PLAY
button
@® or PAUSE
button
® again.
@®
Stop Button
(HM STOP)
@
Press this button to stop the playback.
@
The
rotation
of the disc stops, and the total number
of
tracks and the total
playback
time are read out on the
TRACK NO, and TIME sections of the display.
@
During programmed
playback, the total number of tracks
programmed
in memory
and the total
programmed
per-
formance time are displayed.
@
Automatic Search Reverse Button ( Kd )
@
Press this button to move the pickup backward, to return
to the beginning of the desired track.
e
If this button is pressed during playback or pause, the pick-
up moves
back
ward
to the beginning of the track that
corresponds to the number of times the button was pressed.
@
Automatic Search Forward Button
( >>I )
@
Press this button to move the pickup forward and advance
to the beginning of the desired track.
©
Press this button to move playback in fast reverse.
e
If the button
is pressed while-the machine is in the Pause
state, the fast reverse will operate three times faster than
the reverse speed when
the machine
is in the play state. ~
No sound will be produced.
@
Press this button to move playback in fast forward.
@
Whe the machine is in play, sound will be produced during
the time that the button is being pressed and the fast for-
ward is operating.
@
Headphone Jack (PHONES)
@®
Volume adjustment knob
@) Output terminal (FIX-VARIABLE)
COAXIAL)
@
This terminal outputs digital data.
OPTICAL)
This terminal output data as fight.
Optical
fiber
cord
used:
Tos-Link
types
TOCP155
or
TOCP172.
Z
Caution:
Optical fiber cord is sold separately.
Advertisement
