Denon DCD-1500 Service Manual page 6

@. Repeat Button (REPEAT)
© Press this button to repeat playback.
@ When the REPEAT button is pressed, the [REPEAT]
indicator tights and repeated playback is performed. for
ali of the tacks on the disc. During programmed
playback, all of the tracks programmed into memory are
played repeatedly.
Press the REPEAT button again to cancel the repeat
operation,
@® Call Button (CALL)
© Press this button to verify the track numbers that have
been programmed into memory.
@ Time Mode Button (TIME MODE)
@ This button is used to select the type of information to
be read out under the TIME section of the display.
Either the elapsed playback time of the current track,
the remaining playback time for that track, or the
playback time for the remaining tracks on the disc can
be selected,
Normally the elapsed playback time of the current track
is displayed. }f the button is pressed once, the [SINGLE }
indicator lights and the remaining time left to play on
the track is displayed. If the button is pressed again, the
"SINGLE | indicator goes on, and the [TOTAL]
indicator goes on, and the playback time for the remain-
ing tracks left on the disc is displayed. If the button is
pressed once more, the | TOTAL j indicator goes out
and the display returns to the elapsed playback time for
that track,
{f the button is pressed so that the [TOTAL | indicator
fights during programmed playback, the playback time
for all of the remaining programmed tracks is displayed.
@ Clear Button (CLEAR)
©@ Press this button to correct the programmed contents
of memory.
»
'@. Timer Button (TIMER)
*@ This button is used in conjunction with an audio timer
to perform timer playback at the specified time.
® Volume adjustment knob
@ This knob is used to adjust the output jevel (volume) of
the headphone jack.
@ Headphone Jack (PHONES) '
© When using headphones, please listen to them at an
appropriate volume.
(Headphones are sold separately.)
@® Output terminal (OUTPUT)
® Connect the output terminal to the input terminal of the
amp.
@ Sub code output terminal
(SUB CODE OUT)
® This output terminal will enable the more effective use
of the compact disc player in the future,