Technics SL-MC410 Operating Instructions Manual page 14

Disc grouping play
To name groups
You can name your groups. The changer has several preset names
to choose from.
[During sequential play or while it is on stop]
Press GROUP ENTER.
If any groups have been registered already, their letters will
light up.
[Within 7 seconds]
Select the name you want with the SKIP/CURSOR
and » buttons.
Names change in rotation as shown below, every time you
press SKIP/CURSOR ( or »|).
DISC SKIP DISC GROUPING PLAY
fi iiiiv^yjusor,-'
GROUP ENTER
group E5 SIS
3SS
ENTER
BALLADS —* BLUES — CLASSIC — COUNTRY «— DANCE
FAVORITE
ROMANTIC
HIP HOP
ROCK *— POP —► PARTY — OLDIES *— NEW AGE
[Within 7 seconds]
Press the DISC GROUPING PLAY button for the
group you want to name.
For example: To name group A
Press [A].
Repeat steps 1, 2 and 3 to name other groups.
DISC GROUPING PLAY
To cancel names
Select "RESET" in step 2 and then the name of the group you want
to cancel in step 3. Thereafter, the group will appear as "GROUP ...
(A,B,C,D or E.)".
To check what discs are in what groups
1. [During sequential play or while it is on stop]
Press the DISC GROUPING PLAY button (A, B, C, D or E) you
want and then press H.
2. Press either DISC SKIP button (- or +).
Every time you press DISC SKIP, the next disc number in order
is displayed.
mm;:r
After checking, if you press the button of a group that is lit on the
display, the disc grouping mode disengages.