Download
Share
Print this page
illus P S-R S02A-1 Installation Instructions
  1. Manuals
  2. Brands
  3. illus Manuals
  4. Accessories
  5. P S-R S02A-1
  6. Installation instructions

illus P S-R S02A-1 Installation Instructions

Microwave sensor
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
INSTALLATION INSTRUCTIONS
Specifications
Power source: 220-240V/AC
100-130V/AC
Power frequency: 50/60Hz
Transmission power: <0.2mW
Working temperature: -15°C~+70°C
Detection angle: 360°
Detection range: 2-10m (radii.) (adjustable)
Time setting: 8sec to 12min (adjustable)
Light-Control: 2~2000LUX (adjustable)
Power consumption: approx.0.5W
Installation sit: ceiling mounting
HF system: 5.8GHz CW electric wave,ISM band
Note:
the high-frequency output of this sensor is <0.2mW- that is just one 5000
transmission power of a mobile phone or the output of a microwave oven.
Sensor information
Height of installation2.5~3.5M
P S-R S02A-1 MICROWAVE SENSOR INSTRUCTION
Max:10m
Sensing distance adjustment range
64.00 mm
th
of the
:
Max:10m
Min:2m
Min:2m
(Height of installation2.5M)
/
(
)
(
)
(
)
,
Transmission power<0.2mW
/
Sensing angle adjustment range
-
:
-
/ :
:
- :
:
:
:
:
:
:
:
:
360º

Advertisement

loading

Summary of Contents for illus P S-R S02A-1

  • Page 1 INSTALLATION INSTRUCTIONS P S-R S02A-1 MICROWAVE SENSOR INSTRUCTION 64.00 mm Specifications Power source: 220-240V/AC 100-130V/AC Power frequency: 50/60Hz Transmission power: <0.2mW Working temperature: -15°C~+70°C Detection angle: 360° Detection range: 2-10m (radii.) (adjustable) Time setting: 8sec to 12min (adjustable) Light-Control: 2~2000LUX (adjustable) Power consumption: approx.0.5W...

  • Page 2: Installation

    Utilizing field and introduction This Product is a moving object sensor that can detect angle of 360°and it’s working frequency is 5.8G.The advantage of this product is stable working state (stable working temperature: -15°C~+70°C), This Product adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs better than infrared sensor.

  • Page 3: Time Setting

    Detection range setting(sensitivity) Detection range is the term used to describe the radii of the more or less circular detection zone produced on the ground after mounting the sensor light at a height of 2.5m, turn the detection range control fully anticlockwise to select minimum detection range (approx.2m radii), and fully clockwise to select maximum detection range (approx.

  • Page 4: Troubleshooting

    Warning! The following situation will lead to misoperation 1. Being installed in the rocking object will lead to misoperation. 2. The shaking curtain which is blown by wind will lead to misoperation, please select the suitable installed place. 3. Being installed in the place where the traffic is busy will lead to misoperation. 4.
  • Page 5 Warning! The detection distance may multiply for the reflection on microwave electromagnetic field bythe metal or glass materials. Thus, lower the sensitivity to reach the appropriate detection distance. Never turn the SENS knob to the maximum value to avoid error detection. Also thesurrounding environment will lead to error action, e.g.