Table of Contents
Advertisement
Safety signs
The following safety signs are placed on your machine as a guide for your safety and for those working with you. Walk
around the machine and note the content and location of these safety signs before operating your machine.
Keep safety signs clean and legible. Clean safety signs with a soft cloth, water, and a gentle detergent. Do not use
solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage or remove
safety signs.
Replace all safety signs that are damaged, missing, painted over, or illegible. If a safety sign is on a part that is
replaced, make sure the safety sign is installed on the new part. See your dealer for replacement safety signs.
INTRODUCTION
Safety signs that display the "Read Operator's Manual" symbol are intended to direct
the operator to the operator's manual for further information regarding maintenance,
adjustments, or procedures for particular areas of the machine. When a safety sign
displays this symbol, refer to the appropriate page of the operator's manual.
93103372
Front view
47779318 22/09/2014
Find manuals at https://best-manuals.com
1
7
Advertisement
Table of Contents
