AARCOMM Wireless Kill Switch Quick Start Manual

Wireless Kill Switch
Quick Start Guide
Aarcomm's Wireless Kill Switch Quick Start
Guide provides support for the following items,
included in your Wireless Kill Switch remote
control system:
• Wireless Kill Switch remote
• C220/C200 receiver
• Antenna
• Universal Charging Cradle
• Wiring Harness

POWERING ON THE WIRELESS KILL SWITCH

The Wireless Kill Switch unit requires a special sequence to
power on. This sequence verifies that the start and stop buttons
are working correctly prior to operation. It also minimizes any
accidental powering-on of the unit.
To power on the Wireless Kill Switch:
• Press and hold the RED ESTOP/OFF
• Press and hold the GREEN
• Release the RED ESTOP/OFF
• Release the GREEN BUTTON.
• The Wireless Kill Switch will now display a startup screen.
Regular flashing GREEN light: Unit turned on but no radio link to
receiver.
BUTTON.
BUTTON.
BUTTON.
Solid, or quickly flashing GREEN
to a matched receiver.

POWERING OFF THE WIRELESS KILL SWITCH

Pressing the RED ESTOP/OFF BUTTON
less Kill Switch unit. The display in the Wireless Kill Switch will
be put into sleep mode and will not draw power from the battery,
even though there are images being displayed.

MATCHING INSTRUCTIONS

To successfully pair a Wireless Kill Switch with a receiver,
both devices need to enter matching mode within a 60-second
timeframe. The receiver offers two different methods to activate
light: Unit is turned on and linked
will shut down the Wire-