Advertisement
CAUTION: The coffee maker becomes very hot during the brew cycle. Please handle
with extreme care.
how to remove the filter
basket
11. The keep warm plate will operate,up to two hours, as long as the on/off button is on
(red LED light is lit).
12. Always switch the coffee maker to OFF when the carafe is empty or you no longer want to keep coffee
hot. The coffee maker will shut off automatically after 2 hours.
13. If two (2) or more pots of coffee are to be made it is recommended that the coffee maker be allowed to cool
for 10 minutes between each brewed pot. The filter basket should also be rinsed out after each brew cycle.
PROGRAMMING
YOUR
COFFEE
MAKER
-
Automatic
Operation
SETTING THE CLOCK
1. You may set the clock any time before or after brewing.
2. Press the HOUR and then the MIN buttons to set the current time. Press and hold the buttons to
scroll through numbers quickly. When the number displayed approaches the desired setting,press and
release the button to advance one digit at a time.
Note: AM is indicated in the upper left hand corner of the LED digital
clock/display and PM in the lower left hand corner.
SETTING THE AUTO BREW START TIME
1. To set the desired auto brew start time first press the PROGRAM button. The word PROGRAM
will begin flashing on the LED digital clock/display to indicate an auto brew start time is being set.
2. Set the time you want coffee to begin brewing by using the Hour and Min buttons
following the same directions for setting the clock.
Note: After setting the auto brew start time the PROGRAM indicator will automatically
stop flashing after a few seconds, and the display will return to the current time.
3. To confirm your auto brew start time simply press the PROGRAM button and the pre-set time will be dis
played for a few seconds on the LCD display. The PROGRAM indicator will continue to flash while
confirming the pre-set auto brew time. It will automatically return to the current time after a few seconds.
4. After setting the auto brew start time, prepare coffee following thq directions in preparation for use.
5. Press the AUTO button. A green LED light will light up and the word AUTO will be displayed in the upper
right hand corner of the LCD display.
6. Your coffee maker will automatically begin brewing at the pre-set time. When the brew cycle begins,the
Auto icon will go out and the red on light will come on to indicate the coffee maker is in operation
7. To re-set the auto brew time for the same pre-set time for the next day simply press the AUTO button. The
green LED light will light up and the word AUTO will again be displayed in the upper right hand
corner of the LCD display.
PAUSE & SERVE
Allows you to interrupt the brewing cycle and pour a cup of coffee before the entire
carafe is finished brewing
CAUTION: While this will temporarily stop the coffee from dripping into
the carafe,it does not stop the brewing cycle. After serving, the carafe should
be immediately returned to the carafe plate to prevent the filter basket from
overflowing.
Advertisement
