Summary of Contents for APLOS ANGEL 600 GPD
- Page 1 Direct Flow Reverse Osmosis Drinking Water System 600 GPD Instruction Manual Manufactured for EPS Group aplos.ie...
- Page 2 Introduction Aplos Angel 600GPD is one of the newest drinking water purifiers, with a compact, slim design, 4 stage filtration, large capacity, direct flow (i.e., no storage tank) system, that produces minimum amount of wastewater. Color indicators embedded in the operation panel help monitor the remaining filter lifespan, warning when replacement is required.
-
Page 3: Product Description
Product description Name Name Name RO Purified water port Frame RO membrane life indicator Back housing Drain port CFIII life indicator Power port Flush button Inlet water port Reset button Water Purification Process Flowchart Name Inlet solenoid valve CFIII composite filter Booster pump RO filter Wastewater solenoid valve... -
Page 4: Specifications
Booster pump valve Green Green Power adapter Main control board Specifications Direct flow reverse osmosis drinking Product name Brand APLOS Angel 600 GPD Model Filtration stages Rated voltage 220V～ Rated power Feed water requirements Municipal tap water or pre-treated well water Inlet water temperature 5°C-38°C... -
Page 5: Filter Replacement
Display signal description 1. Filter life indicators Filter life power indicators (red, yellow, green) display in real time and their color reflects the corresponding filter lifespan. 1.1 Green indicates that the life of the filter is normal. 1.2 Yellow indicates that the life of the filter is about to expire. -
Page 6: Installation Step
Installation Step Before installation, please check that all components are included in the package. I. Install the three-way ball valve (see Figure 1) Figure 1 1.1 Take out the three-way ball valve from the accessory box. 1.2 Close the water inlet valve. 1.3 Connect the water inlet three-way valve and the ball valve (note that the threaded connection should be sealed with padding material and... -
Page 7: Repair Guide
Repair Guide Failure description Possible Cause Troubleshooting Open the water inlet valve Replace the filter Inlet valve is not open Purified water CF Composite filter or Check the power under the sink, as this isn't coming RO membrane blockage mostly occurs when the power under the through the sink is off. -
Page 8: Packing List
• faults and problems that have arisen due to untimely replacement of consumables. All claims related to taste, smell, and other quality indicators of water purified by this system should be accompanied with a water test report issued by an accredited laboratory. aplos.ie...
Need help?
Do you have a question about the ANGEL 600 GPD and is the answer not in the manual?
Questions and answers