Advertisement
3125 Mercer Ave Ste 103 & 104 Bellingham, WA 98225 (360) 223-4997 II (360) 510-7754
Aquarium Assembly Instructions
*AD-1060-WS
*AD-1260-WS/SILVER
*AD-1560-WS/SILVER
*AD-1760-WS/BP
*AD-1980-WS/BP
*AD-2320-WS/BP
*AD-3000-WS/BP
*AD-2320-WS/BP
*AD-1060-BK/WT/RD
*AD-1260-BK/WT/RD/BW
*AD-1560-BK/WT/RD/BW
*AD-1760-BK/WT/RD
*AD-1980-BK/WT/RD
*AD-2300-BK
>>24/7 Technical Assistance<<
Advertisement
Table of Contents
Related Manuals for AQUA DREAM AD-1060-WS
Summary of Contents for AQUA DREAM AD-1060-WS
- Page 1 Aquarium Assembly Instructions *AD-1060-WS *AD-2320-WS/BP *AD-1260-WS/SILVER *AD-1060-BK/WT/RD *AD-1560-WS/SILVER *AD-1260-BK/WT/RD/BW *AD-1760-WS/BP *AD-1560-BK/WT/RD/BW *AD-1980-WS/BP *AD-1760-BK/WT/RD *AD-2320-WS/BP *AD-1980-BK/WT/RD *AD-3000-WS/BP *AD-2300-BK 3125 Mercer Ave Ste 103 & 104 Bellingham, WA 98225 (360) 223-4997 II (360) 510-7754 >>24/7 Technical Assistance<<...
- Page 2 Aquarium Assembly Instructions *AD-1060-WS *AD-2320-WS/BP *AD-1260-WS/SILVER *AD-1060-BK/WT/RD *AD-1560-WS/SILVER *AD-1260-BK/WT/RD/BW *AD-1760-WS/BP *AD-1560-BK/WT/RD/BW *AD-1980-WS/BP *AD-1760-BK/WT/RD *AD-2320-WS/BP *AD-1980-BK/WT/RD *AD-3000-WS/BP *AD-2300-BK Identify and prepare space for level aquarium placement with plenty of room to open the crates. Floor protection is also recommended. Using proper safety gear and tools (hammer, gloves, protective glasses), uncrate the aquarium and cabinet.
- Page 3 Overflow Filtration System Assembly Instructions *AD-1060-WS *AD-2320-WS/BP *AD-1260-WS/SILVER *AD-1060-BK/WT/RD *AD-1560-WS/SILVER *AD-1260-BK/WT/RD/BW *AD-1760-WS/BP *AD-1560-BK/WT/RD/BW *AD-1980-WS/BP *AD-1760-BK/WT/RD *AD-2320-WS/BP *AD-1980-BK/WT/RD Diagram 1: *AD-3000-WS/BP *AD-2300-BK A - Filter box and drawers B - Overflow Filter Zones C - Water Pump D - Outlet Valve Assembly...
- Page 4 1 - Attach the outflow pipe to the underside of the tank. Be sure to guide the pipe end into Fig. 1 the guide hole at the top of the filter box before tightening it down. [Fig. 1 and Fig. 2] Fig.
- Page 5 Fig. 8 5 - Locate the included pump and accessories. [Fig. 9] Fig. 9 6 - Slide the two metal O-ring clamps onto the inlet hose. [Fig. 10] Fig. 10 7 - Assemble the outlet that corresponds to the inlet hose diameter, using an outlet and Fig.
- Page 6 Fig. 15 9 - Tighten the metal O-ring clamps onto both ends of the hose and lower the water pump into its Fig. 16 bay in the filtration system. [Fig. 16, Fig. 17, Fig. 18] Fig. 17 Fig. 18 10 - Install the rubber gasket in the end of the inlet hose and attach it to the underside of Fig.
- Page 7 12 - Filter Media Example Set up: Prepare your desired filter media. [Fig. 22] Fig. 22 13 - Gently lift the outflow pipe out of the guide hole in the top of the red filter box and Fig. 23 remove the drawers. [Fig. 23 and Fig. 24] Fig.
- Page 8 18 - Add filter media to basket filters (ceramic Fig. 29 rings pictured). [Fig. 29 and Fig. 30] Fig. 30 19 - Install the glass cover to the sump system. Fig. 31 [Fig. 31] 20 - On the top of the tank, connect the inflow pipe to the elbow at the top of the overflow Fig.
Need help?
Do you have a question about the AD-1060-WS and is the answer not in the manual?
Questions and answers