Page 1
USER MANUAL MODELS:OPS30 ELECTRIC PRUNING SHEARS Dear Customer: Please read all safety rules and instructions carefully before operating this tool. Product Questions or Concerns?Contact US:support@orblontool.com...
Page 2
English Product Diagram EN.01 Product Description EN.02 EN.02 Charging the Battery Battery Use Precautions EN.03 EN.04 Safety Precautions Personal Safety EN.04 EN.05 Operation Operation Instruction EN.06 EN.08 Faulty Operation Extended functions EN.09 EN.10 Maintenance Services EN.10...
Dear users, thank you for choosing our product! Please read this user manual carefully to take full advantages of the product. Please keep this user manual in a safe place for future references. Product Diagram 6.Ergonomics 3.LCD Screen Non-slip Handle 1.SK5 Blade 4.Brushless Motor 2.trigger...
Electric Pruning Shears Model No OPS30 Cutting Diameter 10-40MM Power 200W Weight 1.25KG Battery Pack Battery pack type LI-lon Voltage 2.0AH 37Wh Capacity Charger Input 100-240V-50/60HZ 0.8A MAX Charger Output 1.2A Charging time Working Time Charging the Battery It is recommended to fully charge the battery before the first time use.
1. It is normal that the battery and charger heat up during charging. 2. It is recommended to charge the battery every 3 months during long-term storage to perserve the full life-time of the battery. 3. It takes approximately 5 charging-discharging cycles to reach the full capacity of a new or stored battery.
Workplace Safety 1. Always keep the workplace well-lit.A cluttered and dark workplace may cause accidents. 2. Do NOT operate the pruning shears in an explosive, flammable, or humid environment. 3. Keep children or other personnel away from the tool during operation. Operator's distraction can lead to accidential injuries.
Page 7
3. Normal operation: Pull the trigger to close the blades. Release the trigger to open the blades. 4. Please open and close the blades a few times before cutting anything to make sure that the pruning shears are functioning normally. 5.
Page 8
③ ④ WARNING: Keep fingers or other body parts away from the blades during operation. Failing to do so may cause personal injuries! WARNING: Children are not allowed to operate this tool! WARNING: Please power off the tool (press and hold the power button) and remove the battery for storage after each use.
Replacing the blade 2. Unscrew the fixed shaft screw counterclock- 1. Unscrew the screws with a Phillips wise with a suitable hexagonal wrench and screwdriver and push the blade gear remove the washer, then unscrew the shaft guard upwards to remove the gear guard. screw counterclockwise with a hexagonal socket wrench and remove the spacer from the shaft.
To install the blades, follow the reverse order of the disassem- bly steps. Blades Lubrication WARNING: Please Power off the tool and remove the battery before lubricating the blades. 1. Keep the blades open when adding lubricants. 2.Squeeze lubricating oil from the oil bottle into the moving area between the upper and lower blades, then make a few empty cuts to evenly distribute the lubricant.
Extended functions You can use this product along with the ORBLON extension rod to achieve the best results. Various Applications Electric pruning shears Leaf Blower Hedge Trimmer 6-inch Chainsaw 4-inch Chainsaw 8-inch Chainsaw ! Note: The package does not Include the high rod, tou can visit the ORBLON brand in the amazon store to buy this ac cessory! EN.09...
Maintenance 1. Do NOT cut branches with a diameter larger than the maximum opening of the blades. Do NOT cut hard objects, such as metal, rock, or anything other than plants. If this is done, it will cause damage to the blade. 2.