Download Print this page

make it real 3C 4G TECH ACCESSORIES SET Instructions

Tech accessories set

Advertisement

Quick Links

INSTRUCTIONS
TECH ACCESSORIES SET
ENSEMBLE D'ACCESSOIRES TECHNO
YOU WILL NEED
IL TE FAUDRA
HOW TO USE THE SELFIE LIGHT / UTILISATION DE LA LAMPE À ÉGOPORTRAIT
Remove the selfie light from the
1
box and gather your 2 AAA batteries
and screwdriver.
Retire la lampe à égoportrait de sa
boîte et prépare les deux piles AAA
et un tournevis.
Use a screwdriver to loosen the battery
2
compartment security screw and open
the cover door.
À l'aide du tournevis, desserre la vis
de sécurité du compartiment à piles
et ouvre le cache.
Install the 2 AAA batteries according to the
3
diagram shown inside the battery compartment.
Place les deux piles AAA en suivant les
indications du compartiment à piles.
Place the cover door back onto
4
the compartment and reinstall the
security screw.
Replace le cache du compartiment et
revisse la vis de sécurité.
HOW TO USE THE PHONE STAND
UTILISATION DU SUPPORT DE TÉLÉPHONE
Place the phone stand on a flat surface.
1
Pose le support de téléphone sur une surface plane.
Take your phone and set it either
2
vertically or horizontally against the
rainbow backing piece, so the bottom
edge of the phone sits securely within the
notches on the base of the stand.
Place ton téléphone à l'horizontale ou
à la verticale afin qu'il repose contre
l'arc-en-ciel. Le bas du téléphone doit
être situé entre les deux encoches à la
base du support.
CONTAINS
CONTIENT
2 earbud charms
2 breloques pour écouteurs
1 phone lanyard
1 dragonne pour téléphone
1 puffy sticker sheet
1 planche d'autocollants en relief
1 clip-on selfie light
1 lampe à égoportrait à clipser
1 phone stand
1 support de téléphone
Press together the top edges of the
5
selfie light so the bottom edges open,
then slide the opening over the top of
your phone. The lighted side should
face towards yourself.
Appuie sur le haut de la lampe à
égoportrait de façon à écarter les deux
parties du bas, puis insère le haut de
ton téléphone dans l'ouverture.
Le côté illuminé doit être face à toi.
Use the small button on top of
6
the selfie light to turn the light
on and off.
Tu peux éteindre ou allumer la
lampe à l'aide du petit bouton
qui se trouve en haut.
Take your selfie photos, then remove
7
the light after use.
Prends tes photos, puis retire la lampe
lorsque tu as terminé.
HOW TO USE THE EARBUD CHARMS
UTILISATION DES BRELOQUES POUR ÉCOUTEURS
Take an earbud charm and gently slide the
1
silicone ring piece onto the earbud stem.
Fais glisser délicatement l'anneau en silicone
de la breloque sur la tige de l'écouteur.
Repeat with the second charm.
2
Répète l'opération avec la deuxième breloque.
14031-INSCAN-01-V1

Advertisement

loading

Summary of Contents for make it real 3C 4G TECH ACCESSORIES SET

  • Page 1 INSTRUCTIONS TECH ACCESSORIES SET ENSEMBLE D’ACCESSOIRES TECHNO YOU WILL NEED CONTAINS CONTIENT IL TE FAUDRA 2 earbud charms 2 breloques pour écouteurs 1 phone lanyard 1 dragonne pour téléphone 1 puffy sticker sheet 1 planche d’autocollants en relief 1 clip-on selfie light 1 lampe à...
  • Page 2 MANUFACTURED FOR / FABRIQUÉ POUR doivent être retirées du jouet. Les bornes d'alimentation ne doivent pas être THREE CHEERS FOR GIRLS BY / PAR MAKE IT REAL mises en court-circuit. Ne pas mélanger des piles alcalines, standard MISE EN GARDE : les autocollants ne sont pas faits (carbone-zinc) et rechargeables (nickel-cadmium).