Summary of Contents for Penguin COLD THERAPY CHILLER
Page 1
P E N G U I N C H I L L E R S COLD THERAPY CHILLER Owners Manual W W W . P E N G U I N C H I L L E R S . C O M...
Page 2
Class A refrigerants. The regulatory warning labels on Penguin Chillers are EPA mandated for all refrigerants considered flammable which covers a wide range of refrigerants including mildly flammable refrigerants like R32 as well as highly flammable gasses such as butane (R600) and propane (R290).
Page 3
COLD THERAPY WATER CHILLER SETUP Locating the Chiller Chillers work on the principle of moving heat from one spot to another. In the case of a water chiller, its job is to move heat from the water out into the air. This means proper air flow is critical to the operation of a chiller.
Page 4
Flow/Filter: The Cold Therapy Chiller has a built in pump, so no need to worry there. ***Please note your setup needs to gravity prime to the pump, the pump is not capable of self priming/suction. Place the chiller within 3′ of the drain of your tub, the bottom of the chiller should be at the same or lower height compared to the bottom of your tub –...
Page 5
If your chiller is left outdoors below freezing ambient temperatures without being drained and damage occurs, Penguin Chillers is not liable for the damage. It can be returned to our facility for repair, but will not be covered under warranty.
Page 6
Troubleshooting Cont'd Check the water temperature with an external thermometer (not an IR gun). It is possible that the water is cold and the controller is providing an incorrect reading. When referring to a Temperature, please clearly identify what the specific sources are. Ambient air temperature.
Page 7
Troubleshooting Flow Cont'd If the above mentioned steps did not work, try removing the fitting that's going up to the filter housing. Take a garden hose and put it up to that tubing line (leading to the filter), and flush the system backwards. Once you do so, you will see air bubbles coming back up into your tub.
Page 8
This limited warranty is void if (i) the label bearing the serial number of this product has been removed or defaced, (ii) the product is not distributed by Penguin Chillers or (iii) this product is not purchased from an authorized Penguin Chillers reseller. If you are unsure whether a reseller is an authorized or not, contact us.
Page 9
(865) 214 - 6509 www.PenguinChillers.com Support@PenguinChillers.com A Controller Guide was included with your chiller. Please see the FAQ Page on our website to view a copy of the controller guide and other helpful information. www.PenguinChillers.com...
Need help?
Do you have a question about the COLD THERAPY CHILLER and is the answer not in the manual?
Questions and answers