Contents I. Precautions before use Please read this instruction manual carefully before you use this scale. I. Precautions for use..........1 1. Rain or washing with water is strictly prohibited. 2. Electronic scales are strictly forbidden to be placed II. Preparation before use........1 in hot or humid places.
interference from other appliances. : battery low voltage state 4. Do not put anything on the scale when you turn on the power. Warning when the weight is high than max 5. It is best to heat the machine for 15-20 minutes range (Hi) before using the electronic scale to ensure accuracy.
● kg : kilogram unit “Add xx” . After 2s, the scale returns back to weight, if continue to cumulative, then must remove the object, V. Function operation waiting for weight, put the object on again, waiting for 1. Boot the data to stabilize, press again, and so on.
Page 5
weighing data is less than the lower limit value, or Upper limit value setting: in the state of returning greater than the upper limit value, the alarm is issued. to zero, press the key more than 3s, enter the 4>If only the lower limit value is not 0, the upper lower limit value setting,display "UP"...
that the brightness is low the scale that you want to weight, that’s the net weight。 It will “P02 xx” filter setup shows negative number when you take the goods away。The 00, 01, 02..09 the greater the number, the tare Model will be shows again when you press again.
Page 7
05:5d 00: the baud rate is 1200 06:6d 01: the baud rate is 2400 07:7d 02: the baud rate is 4800 08:8d 03: the baud rate is 9600 09:9d “ P06 xx ” Three color light alarm mode 04: the baud rate is 19200 selection “P09 xx”...
Page 8
“P14 XX” directly displays "XXXXXX", the value 01: Cody format of the inner code. 02: Xiangping format “P15 XX” automatic average function setting 03: Excel format 00: automatic average closing 04: Yaohua A7 format 01: automatic average opening 05: Yaohua A1+format “P16 XX”...
3: represents three points correction 6 represents 30d starts alarm 7 represents 35d starts alarm Press key to switch the next 8 represents 40d starts alarm Display "SP X";Press key to switch the unit 9 represents 45d starts alarm 0: represents that the measuring unit “P18”...
Page 10
the next value of the weight, wait for the steady light to be 0:The representation is in range as unit and the data , press it is said to start automatic has zero decimal points correction. When the correction is completed, the 0.0:...
Page 11
Then jump to the full range value, put the weight of the corresponding value, wait for the steady light to light up,,press then the electronic scale will automatically correct this value.